Bijie pseudo agglomeration crusher
Category:
chemical industry/Crushing machinery and equipment/Pulverizer
Model:
XYSG600
Brand:
Anhui Xinyuan
model:
XYSG600
type:
Hedge style
Feed particle size:
Ultrafine grinder
discharge particle size:
four
production capacity:
1000-3000
Air consumption:
one
pressure:
two hundred and twenty
installed capacity:
eleven
Maximum material hardness:
strong
Applicable materials:
Coarse and fine materials
air volume:
one
speed:
one thousand four hundred and fifty
power consumption:
two
Material moisture content:
tall
Maximum material edge length:
zero point four
weight:
nine hundred
Crushing degree:
Ultrafine grinder
Item Number:
XYSR00001
Application field:
Fertilizer industry
Is it a cross-border source of goods:
No
Retail Price
36,500.00USD
重量
kg
- Product Description
-
model XYSG600
type Hedge style
Feed particle size Ultrafine grinder
discharge particle size four
production capacity 1000-3000
Air consumption one
pressure two hundred and twenty
installed capacity eleven
Maximum material hardness strong
Applicable materials Coarse and fine materials
air volume one
speed one thousand four hundred and fifty
power consumption two
Material moisture content tall
Maximum material edge length zero point four
weight nine hundred
Crushing degree Ultrafine grinder
Item Number XYSR00001
Application field Fertilizer industry
Is it a cross-border source of goods No
Description :
Bijie pseudo agglomeration crusher
（three）Structure
The main components of the machine include: spindle, roller, concave plate, housing, frame support device, adjustment mechanism, feeding hopper, transmission part, etc.
（4） working principle
The machine mainly uses the grinding and shearing of the gap between the high-speed running drum and the concave plate. The size of the gap determines the degree of material crushing. The drum speed and diameter can be adjusted. After urea enters the machine body, it hits the body wall and baffle and is crushed. Then, it is ground into powder through the rack between the drum and the concave plate. The gap between the concave plates is adjusted by the adjustment mechanism within the range of 3-12 millimeters to adjust the degree of crushing, and the feeding port adjustment mechanism can control the production volume.
（5） Equipment installation
1. Place the equipment flat on the floor or platform, fill it flat, and prevent it from shaking during operation.
2. Equipment adjustment: After the equipment is in place, check whether the bolts of each component are loose and tighten them securely. Pull the drive belt without power to make the rolling mill idle. If the cleavage is found to be stuck, the distance between the two rollers can be adjusted to solve the problem (there is a gap adjustment device at both ends, marked with the direction of tightening adjustment. Generally, it has been adjusted to the ideal position when it leaves the factory.)
3. Power supply: The power supply for the crusher is 380V three-phase electricity. Please refer to the technical parameter table for feeding; After connecting the controller, first jog the device and refer to the direction of the arrow rotation. If it flips, adjust the wiring phase.
AfterSalesService :
Key words:- Bijie pseudo agglomeration crusher
More Products
