Liaoning Ammonia Carbonate Crusher
Category:
chemical industry/Crushing machinery and equipment/Pulverizer
Model:
XYSG800S
Brand:
Anhui Xinyuan
model:
XYSG800S
type:
Hedge style
Feed particle size:
Ultrafine grinder
discharge particle size:
four
production capacity:
1000-6000
Air consumption:
one
pressure:
two hundred and twenty
installed capacity:
fifteen
Maximum material hardness:
one
Applicable materials:
Fertilizer, straw, leaves
air volume:
one
speed:
one thousand four hundred and fifty
power consumption:
two
Material moisture content:
tall
Maximum material edge length:
zero point one
weight:
nine hundred and sixty
Crushing degree:
Ultrafine grinder
Item Number:
XYSG00002
Application field:
fertilizer
Is it a cross-border source of goods:
No
Retail Price
46,000.00USD
重量
kg
- Product Description
-
model XYSG800S
type Hedge style
Feed particle size Ultrafine grinder
discharge particle size four
production capacity 1000-6000
Air consumption one
pressure two hundred and twenty
installed capacity fifteen
Maximum material hardness one
Applicable materials Fertilizer, straw, leaves
air volume one
speed one thousand four hundred and fifty
power consumption two
Material moisture content tall
Maximum material edge length zero point one
weight nine hundred and sixty
Crushing degree Ultrafine grinder
Item Number XYSG00002
Application field fertilizer
Is it a cross-border source of goods No
Description :
Liaoning Ammonia Carbonate Crusher (4) Equipment installation
1. Place the equipment flat on the floor or platform, fill it flat, and prevent it from shaking during operation.
2. Equipment adjustment: After the equipment is in place, check whether the bolts of each component are loose and tighten them securely. Pull the drive belt without power to make the rolling mill idle. If the cleavage is found to be stuck, the distance between the two rollers can be adjusted to solve the problem (there is a gap adjustment device at both ends, marked with the direction of tightening adjustment. Generally, it has been adjusted to the ideal position when it leaves the factory.)
3. Power supply: The power supply for the crusher is 380V three-phase electricity. Please refer to the technical parameter table for feeding; After connecting the controller, first jog the device and refer to the direction of the arrow rotation. If it flips, adjust the wiring phase.
（5） Key Operating Points
Pay attention to the phenomenon of screaming during equipment operation when starting up. Adjust the spacing between the large rollers by adjusting the screw on the side, and adjust the thickness of the powder at the same time. The feeding and crushing can only be carried out when the equipment is operating normally.
（6） Equipment Maintenance
Bearings are frequently lubricated with oil. If the equipment is not used for a long time, the inside of the crusher must be cleaned thoroughly. The two rollers can be brushed clean with a brush and not wiped again. When the crusher is not working, cover the feeding port to prevent foreign objects from entering the rolling mill. The equipment should be operated and maintained by dedicated personnel.
Liaoning Ammonia Carbonate Crusher
AfterSalesService :
Key words:- Liaoning Ammonia Carbonate Crusher
More Products
