Deyang Liquid Fertilizer Automatic Filling Machine

Description :

　　Deyang Liquid Fertilizer Automatic Filling Machine

　　Main technical parameters

　　1. Filling range: 10-20L;

　　2. Measurement accuracy: ± 0.2% (note: filling accuracy depends on the viscosity of the material and the continuity and stability of the material supply);

　　3. Filling speed: ≥ 8 barrels/minute/four heads (20L)

　　Motor power approximately: 1. Dust removal system: 18kw

　　2. Ingredient system: 18kw

　　3. Reactor: 144kw

　　4. Large barrel filling: 10kw

　　5. Centrifugal pump: 10kw

　　6 Control Cabinet: 6kw

　　Total ≈ 206kw

　　Reactor (equipped with) made of 304 stainless steel, electrically assisted heating, with a capacity of 3 cubic meters,

　　Total power: ＜ 100kw

　　1. Vertical structure, three-layer with mixing and insulation

　　2. Material: Made of 304 stainless steel both inside and outside, with stainless steel insulation board and rock wool insulation material

　　3. Steel plate thickness: 6mm-5mm-3mm

　　4. Heating method: electric heating, heating power 72KW

　　5. Mixing device: motor power 7.5KW, 60r/min

　　6. 2 solid feed ports and 4 liquid feed ports

　　7. 2 sets of CPI cleaning balls and 1 set of visual probe lights

　　Technical parameters of Deyang liquid fertilizer automatic filling machine reaction kettle:

　　1. Design volume: 2m3, 3m3, 5m3, 10m3

　　2. Reaction temperature: room temperature~230 ℃

　　3. Mixing speed: 31~43r/min

　　4. Equipment Material: Stainless Steel

　　5. Mixing form: paddle type

　　6. Heating method: electric heating, steam heating

　　7. Thermal conductive medium: thermal oil, steam

　　8. Heat transfer structure: jacket type

　　9. The inner and outer surfaces of the whole machine are polished, which is beautiful and easy to clean

　　10. There is a liquid level display and control device

　　11. PH value detector can be installed as needed

AfterSalesService :

• Deyang Liquid Fertilizer Automatic Filling Machine