Tongren Road Sign Production Road Sign Manufacturer Trustworthy Enterprise

Description :

　　Tongren

　　Highway sign posts, road traffic signs, warning signs for motor vehicles to pay special attention to dangerous locations, with a yellow background, black border, and black pattern. The shape is an equilateral triangle with the top corner facing upwards, often set in areas with complex traffic conditions. The directional signs indicate that motor vehicles should drive at designated locations, with a blue background and white pattern. The shape can be divided into circular rectangles and rectangles, and the function is to guide drivers to the correct driving direction and lane, preventing traffic violations

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Tongren city, and we provide free technical guidance. Tongren Road Traffic Sign Manufacturer, Tongren Traffic Sign Production, Tongren Road Sign Pole Processing, Tongren Traffic Sign Pole, Tongren Scenic Area Indicator Manufacturer, Tongren Tourist Scenic Area Sign, Tongren Traffic Sign Production Manufacturer, Tongren Traffic Sign Manufacturer, Tongren Traffic Safety Sign, Tongren Safety Warning Sign, Tongren Traffic Sign Pole Customization, Tongren Hot Dip Galvanized Traffic Sign Pole Manufacturer, Tongren Multi pole Traffic Sign Pole, Tongren Expressway Sign Pole Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Tongren Road Sign Production Road Sign Manufacturer Trustworthy Enterprise

　　Traffic sign poles can be designed and installed according to customer requirements, and the manufacturer's production process can be said to be correct. Traffic sign pole manufacturers have proven their value with their own strength. The galvanized surface and spray coating of the produced columns have a service life of more than 20 years, with good quality and low price. They are good partners for engineering, commerce, and trade. The type and size of the main component foundation of traffic sign poles should be determined according to the seismic intensity, wind load intensity, geological conditions, and specific requirements of the lighthouse installation site, and specific installation drawings and necessary construction requirements should be provided according to the requirements. Traffic sign pole manufacturers adhere to the corporate spirit of "pursuit, good technology, good quality, and good service", and sincerely invite design institutes and customers to come to the company for guidance. Traffic sign pole manufacturers should provide "good With the goal of" technology and good quality ", we adhere to technological progress, Continuous improvement of product quality

　　Tongren Road Sign Production Road Sign Manufacturer Trustworthy Enterprise

　　Road sign posts play a very important role in road safety instructions, as they are devices that remind drivers of road conditions through silent language. Moreover, these road sign posts can help more drivers in China avoid getting lost in unfamiliar places, benefit from them, and improve the safety of road travel. Nowadays, road sign posts also have the characteristics of visibility and uniqueness, which can timely remind drivers to react in the road environment. It is even more important to ensure that cost-effective road sign posts have a prominent appearance. The road sign posts we design must have unique meaning and corresponding targeted value. In the design of road sign posts in China, they must be more eye-catching, reliable, and effective. Designed to remind drivers to pay attention, Especially in unknown areas where personnel frequently enter and exit, it is even more necessary to ensure the clarity of the indications of such highway signs and their display effectiveness

　　Next:

AfterSalesService :

• Road sign production