Chuxiong Road Traffic Sign Manufacturer Quality Durable

Description :

　　Chuxiong traffic sign poles generally have single column traffic sign poles and multi column traffic sign poles

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Chuxiong city, and we provide free technical guidance. Chuxiong Road Traffic Sign Manufacturer, Chuxiong Traffic Sign Production, Chuxiong Road Sign Pole Processing, Chuxiong Traffic Sign Pole, Chuxiong Scenic Area Indicator Manufacturer, Chuxiong Tourist Scenic Area Sign, Chuxiong Traffic Sign Production Manufacturer, Chuxiong Traffic Sign Manufacturer, Chuxiong Traffic Safety Sign, Chuxiong Safety Warning Sign, Chuxiong Traffic Sign Pole Customization, Chuxiong Hot Dip Galvanized Traffic Sign Pole Manufacturer, Chuxiong Multi pole Traffic Sign Pole, Chuxiong Expressway Sign Label Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Chuxiong Road Traffic Sign Manufacturer Quality Durable

　　The support methods for traffic signs are divided into column type (single column and double column), cantilever type (L-shaped, T-shaped, F-type), gantry type, and attachment type. When using suspended wall support, L-shaped pole type is generally selected. The installation requirements for the support form: the selection of the support form should comply with the principles of uniformity, aesthetics, and visibility. For the same road, if the road structure has not changed, the setting method of similar signs should be kept consistent as much as possible, and the selected support methods generally do not exceed three types

　　Chuxiong Road Traffic Sign Manufacturer Quality Durable Traffic Sign Standard Size What is the standard size of the traffic sign? The standard size of the traffic sign is determined according to the principle of sign classification and setting. It is prohibited to close the gate and someone is working! Size: and 80 * 65 Color: white background, red circular slash, black prohibition symbol

　　Next:

AfterSalesService :

• Road traffic signs and signage