River pool sign production, road sign manufacturer, company direct delivery

Description :

　　Hechi

　　7. The monitoring pole is designed to have a wind resistance of 38 meters per second and a seismic resistance of 8 on the Richter scale;

　　8. The wiring door is fixed with built-in M6 hexagon socket bolts to prevent theft;

　　9. The pole body is assembled on site using multiple standard components, which facilitates manufacturing, transportation, and installation;

　　10. Suitable for monitoring places such as roads, bridges, residential areas, docks, factories, etc;

　　11. Made of 3.0mm galvanized steel pipe, strong wind resistance, sturdy and durable, easy to install

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Hechi City, and we provide free technical guidance. Hechi Road Traffic Sign Manufacturer, Hechi Traffic Sign Production, Hechi Road Sign Pole Processing, Hechi Traffic Sign Pole, Hechi Scenic Area Indication Sign Manufacturer, Hechi Tourist Scenic Area Identification Sign Manufacturer, Hechi Traffic Road Sign Production Manufacturer, Hechi Traffic Sign Manufacturer, Hechi Traffic Safety Sign Manufacturer, Hechi Safety Warning Sign Manufacturer, Hechi Traffic Sign Pole Customization, Hechi Hot Dip Galvanized Traffic Sign Pole Manufacturer, Hechi Multi pole Traffic Sign Pole, Hechi Expressway Sign Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　River pool sign production, road sign manufacturer, company direct delivery

　　Traffic sign posts, also known as road sign posts, highway sign posts, and columns used to indicate traffic routes on both sides of the road. Traffic sign posts are made of steel pipes and have a hot-dip galvanized surface

　　Hechi signage production road signage manufacturer company Direct traffic sign poles are divided into single cantilever sign poles, double cantilever sign poles, double column sign poles, single column sign poles, hot-dip galvanized sign poles and different columns, widely used in highways, urban roads and different roads. So what should we pay attention to when shipping traffic sign poles? Let's have a chat with the manufacturer of road traffic sign poles! The installation of sign support structures for traffic signs should be stopped after the foundation concrete strength reaches the required level and is approved by the supervising engineer The flange of the pillar and the base flange of the concrete foundation should be tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt; 2. After arriving at the site, the manufacturer of road traffic sign poles recommends the full use of safety equipment such as signs and barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction, in order to ensure the safety of pedestrians and operators, and to prevent accidents as much as possible, so as to ensure the safety of construction; 3. The sign board is fixed to the pillar through sliding bolts, clamps and other connecting accessories. The height of the lower edge of the single column sign board from the road surface should be 250cm. The above three points are summarized by the editor of the road traffic sign pole manufacturer for us

　　Next:

AfterSalesService :

• Production of identification signs