Pu'er traffic sign manufacturer, transportation facility production supplier, quality and durability

Description :

　　Pu'er

　　In the products of metal signs, the proportion of aluminum signs is about 90% or more. For more than half a century, aluminum plates have been used to make signs for a long time. The main reason is that aluminum has decorative performance. Many surface decoration processes can be applied and utilized on aluminum plates, making it easy to obtain colorful and multi combination high-end decorative layers. On the other hand, the excellent properties of aluminum plate series determine the characteristics of aluminum plates. In addition to the above reasons, the physical and chemical properties of aluminum plates are in line with the requirements related to the application of signs. Now, the following is a brief introduction

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

Traffic sign manufacturerTransportation facility production supplier with durable quality "/>

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Pu'er city, and we provide free technical guidance. Pu'er Road Traffic Sign Manufacturer, Pu'er Traffic Sign Production, Pu'er Road Sign Pole Processing, Pu'er Traffic Sign Pole, Pu'er Scenic Area Indication Sign Manufacturer, Pu'er Tourist Scenic Area Identification Sign Manufacturer, Pu'er Traffic Sign Manufacturer, Pu'er Traffic Sign Manufacturer, Pu'er Traffic Safety Sign, Pu'er Safety Warning Sign, Pu'er Traffic Sign Pole Customization, Pu'er Hot Dip Galvanized Traffic Sign Pole Manufacturer, Pu'er Multi pole Traffic Sign Pole, Pu'er Expressway Sign Pole Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Pu'er traffic sign manufacturer, transportation facility production supplier, quality and durability

　　What kind of scenic spot signage manufacturers can choose with confidence? So now there are quite a few manufacturers, so sometimes people don't know what kind of manufacturer to choose with peace of mind. It can be understood that when choosing a manufacturer, they should consider the following aspects: choosing a manufacturer with thoughtful service, considering how well the service is done, whether it can provide a good service to everyone. Some manufacturers may have poor service, which cannot make them feel at ease. It is better to choose those that can provide good service and be satisfied. You can learn about the reputation and evaluation of the manufacturer, or communicate with the manufacturer's staff, Basically, it allows everyone to have a good understanding of the manufacturer's service issues

　　Pu'er traffic sign manufacturer, transportation facility production supplier, quality and durability indicator sign is white, and directional sign is blue

　　Next:

AfterSalesService :

• Traffic sign manufacturer