Wenshan Municipal Signs, Signs, Identification Signs, Manufacturer, Reliable Quality

Description :

　　Wenshan Road Traffic Signs are road facilities that use text or symbols to convey guidance, restrictions, warnings, or directional information, also known as road signs or road traffic signs

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Wenshan City, and we provide free technical guidance. Wenshan Road Traffic Sign Manufacturer, Wenshan Traffic Sign Production, Wenshan Road Sign Pole Processing, Wenshan Traffic Sign Pole, Wenshan Scenic Area Indication Sign Manufacturer, Wenshan Tourist Scenic Area Identification Sign Manufacturer, Wenshan Traffic Sign Production Manufacturer, Wenshan Traffic Sign Manufacturer, Wenshan Traffic Safety Sign Manufacturer, Wenshan Safety Warning Sign Manufacturer, Wenshan Traffic Sign Pole Customization, Wenshan Hot Dip Galvanized Traffic Sign Pole Manufacturer, Wenshan Multi pole Traffic Sign Pole, Wenshan Expressway Sign Label Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　The manufacturer of the Wenshan municipal signage and identification signs has reliable quality engraving. The required text is engraved by personnel using a engraving machine through a computer. According to the design requirements, the characters engraved with reflective film are pasted on the aluminum plate with a pre pasted bottom film. The stickers should be neat, the surface should be clean, and there should be no bubbles or wrinkles. Inspection is carried out, and the already pasted sign layout is compared with the drawing, which requires complete correspondence with the drawing. Road traffic signs transmit information to road users in color, shape, characters, graphics, etc., and are used to manage traffic facilities. Traffic signs should be set according to the road and traffic conditions, providing accurate and timely information and guidance through traffic signs, so that road users can arrive smoothly and quickly. Destination, promote smooth traffic and driving safety, provide road information, Plays the role of road language, commands and controls traffic, ensures traffic safety, guides the way, and improves driving efficiency

　　Wenshan Municipal Signs, Signs, Identification Signs, Manufacturer, Reliable Quality

　　Storage and transportation: After the road signs are completed, they should be stored indoors in a well ventilated and dry area for 24 hours before being removed and placed outdoors for another 24 hours

　　Next:

AfterSalesService :

• Municipal signage