Yibin Scenic Area Signboard Production, Transportation Facilities Production, Supplier, Reliable Quality

Description :

　　Yibin

　　Our company has advanced laser plasma cutting equipment nationwide and a production line with a technical team. With strong technical strength, we continuously expand our market. Customer centricity and quality guidance are our pragmatic business principles. We firmly believe that quality is the foundation, integrity is the root, and service is the top priority. We compare quality with equal price and price with equal quality. We welcome new and old customers to call us for negotiation

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Yibin city, and we provide free technical guidance. Yibin Road Traffic Sign Manufacturer, Yibin Traffic Sign Production, Yibin Road Sign Pole Processing, Yibin Traffic Sign Pole, Yibin Scenic Area Indication Sign Manufacturer, Yibin Tourist Scenic Area Identification Sign Manufacturer, Yibin Traffic Sign Manufacturer, Yibin Traffic Sign Manufacturer, Yibin Traffic Safety Sign, Yibin Safety Warning Sign, Yibin Traffic Sign Pole Customization, Yibin Hot Dip Galvanized Traffic Sign Pole Manufacturer, Yibin Multi pole Traffic Sign Pole, Yibin Expressway Sign Pole Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Yibin Scenic Area Signboard Production, Transportation Facilities Production, Supplier, Reliable Quality

　　How should we limit the height of highway signs, electric height limit poles, and equipment with varying degrees of damage, and unify the management of on-site mechanical equipment and electricity usage? Today, the editor from the sign pole manufacturer will take us to learn about the methods of height limit poles. Steel beam calibration: measurement and calibration of the steel beam axis and verticality. Calibration is carried out using a jack and a chain block, and fixed after calibration. Steel column calibration: The verticality of the steel column needs to be checked using a theodolite or a plumb bob. When there is a deviation, a jack is used for calibration. The standard university uses a jack to lift the base slightly, then increases or decreases the thickness of the cushion plate. After the column base is calibrated correctly, the anchor bolts are tightened. After the overall calibration of the steel column is correct, fine stone concrete is poured under the bottom plate of the column base to fix it. The manufacturer of the traffic height limit sign pole stated that the setting of the height limit pole is aimed at restricting large trucks, warning drivers, maintaining traffic order, and setting the height limit on the road section. Roadblock facilities are also designed for driving safety considerations

　　Yibin Scenic Area Signboard Production, Transportation Facilities Production, Supplier, Reliable Quality

　　Traffic road sign bottom mold: Cut the reflective film and lay it flat in the film sticking workshop for 24 hours. Before applying the film, clean the aluminum plate with anhydrous ethanol to remove dust and dirt. Use a film sticking machine to stick the reflective film bottom mold, and use a small rubber roller to compact the entire board surface. After the sign is made, cut off the excess reflective film on the edges

　　Next:

AfterSalesService :

• Production of Scenic Area Signboards