Baise traffic sign pole manufacturer, road sign manufacturer, saves money and effort

Description :

　　Bose

　　The effect of guardrails on highways: obstructing vehicles from crossing the road and preventing them from crossing the median and entering the opposite lane; At the same time, it is also necessary to guide the driver's vision. Barrier barriers are one of the infrastructure of highways. Their effect is to complete the complete closure of highways and prevent people and animals from entering the highways. They can eliminate lateral interference, avoid traffic delays or accidents, and ensure the efficiency of highways. Barrier barriers can be divided into several categories according to their application materials, including metal mesh, steel mesh, barbed wire, and evergreen hedge

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Baise city, and we provide free technical guidance. Baise road traffic sign manufacturer, Baise traffic sign production, Baise road sign pole processing, Baise traffic sign pole, Baise scenic area indicator sign manufacturer, Baise tourist scenic area identification sign manufacturer, Baise traffic sign manufacturer, Baise traffic sign manufacturer, Baise traffic safety sign, Baise safety warning sign, Baise traffic sign pole customization, Baise hot-dip galvanized traffic sign pole manufacturer, Baise multi pole traffic sign pole, Baise expressway sign pole manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Baise traffic sign pole manufacturer, road sign manufacturer, cost saving and worry free. What is the standard size of traffic signs? The standard size of traffic signs is determined according to the principle of sign classification and setting. It is prohibited to close the gate and someone is working! Size: and 80 * 65 Color: white background, red circular slash, black prohibition symbol

　　Baise traffic sign pole manufacturer, road sign manufacturer, saves money and effort

　　It is the carrier of the functions, service functions, and tourist information of scenic spots, and an indispensable part of the improvement of tourist attractions. Scenic spot signs are generally located outdoors. Therefore, in the selection of materials, not only should the visual effect of the material itself be considered, but also different materials should be selected according to the geographical environment, size, natural or artificial landscape, and the number of sign locations of the scenic spot. Tianbao Transportation can provide signs for everyone. Hurry up and buy Tianbao Transportation's products, which generally refer to signs that are expressed in text and pictures and rely on visual perception to convey information. According to research, visual based signs are superior to other sensory types of signs in terms of recognition, visibility, readability, etc. The so-called auditory signs refer to signs that use Using sound to express A form of identification that relies on hearing to transmit information. Generally, auditory identification is a barrier free identification system designed for visually impaired individuals who cannot rely on vision to obtain information. It comes with self-adhesive stickers and is made of frosted PVC backing, What are the categories of various types of signs and road traffic signs produced? Warning signs have yellow backgrounds, black edges, and black patterns, with equilateral triangles in shape and top corners facing upwards. Prohibition signs have white backgrounds, red circles, red bars, and black patterns, with pattern pressure bars. Among them, the signs for lifting the ban on overtaking and lifting speed restrictions have white backgrounds, black circles, black bars, and black patterns. Pattern pressure bars have circular shapes, while yield signs have equilateral triangles with bottom corners facing downwards. Indication signs have blue backgrounds and white patterns, with shapes of circles, rectangles, and squares. The colors of directional signs are blue backgrounds and white patterns, except for milestones, hundred meter stakes, and highway boundary signs. Generally, roads have blue backgrounds and white patterns, with shapes other than location identification signs. For rectangles and squares

　　Next:

AfterSalesService :

• Traffic sign pole manufacturer