Xishuangbanna Traffic Sign and Signboard Manufacturing Double Suspended Rod Processing Factory with High Cost Performance

Description :

　　Xishuangbanna

　　Road traffic signs and markings are a very important component of traffic management, playing a positive role in ensuring road traffic safety, smoothness, and orderliness. Straight ahead, turning left, turning right, straight ahead, and turning left indicate that only vehicles are allowed to go straight

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Xishuangbanna and provided free technical guidance. Xishuangbanna Road Traffic Sign Manufacturer, Xishuangbanna Traffic Sign Production, Xishuangbanna Road Sign Pole Processing, Xishuangbanna Traffic Sign Pole, Xishuangbanna Scenic Area Indicator Sign Manufacturer, Xishuangbanna Tourist Scenic Area Indicator Sign Manufacturer, Xishuangbanna Traffic Sign Manufacturer, Xishuangbanna Traffic Safety Sign Manufacturer, Xishuangbanna Safety Warning Sign Manufacturer, Xishuangbanna Traffic Sign Pole Customization, Xishuangbanna Hot Dip Galvanized Traffic Sign Pole Manufacturer, Xishuangbanna Multi pole Traffic Sign Pole, Xishuangbanna Expressway Sign Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Production of Traffic Signs and Signboards in Xishuangbanna

　　Suggested speed signs are used to remind vehicle drivers to drive at the recommended speed, located at appropriate positions on curves, exits, and ramps. This sign is generally not used alone and should be used in conjunction with other warning signs or additional auxiliary signs to explain the reason for the recommended speed or the location and length of the road section. The recommended speed and speed limit are different and do not have legal effect. The recommended speed value is generally lower than the speed limit value

　　Xishuangbanna Traffic Sign and Signboard Manufacturing Double Suspended Rod Processing Factory with High Cost Performance

　　Classification of sign posts

　　Traffic sign poles generally include single column traffic sign poles and multi column traffic sign poles;

　　The inner edge of the column sign should not intrude into the road construction limit, and generally should be no less than 25cm away from the outer edge or dirt shoulder of the roadway or sidewalk;

　　The height of the lower edge of the traffic sign board from the road surface is divided into: not less than 5500mm for highways, and not less than 5000mm for national and provincial highways. When it is set on urban roads with a large proportion of small cars, the height of the lower edge from the ground can be effective according to the actual situation, but should not be less than 120cm;

　　When set on the roadside with pedestrians and non motorized vehicles, the height should be greater than 180cm

　　Next:

AfterSalesService :

• Production of Traffic Signs and Signboards