Hengyang traffic sign manufacturer, identification sign manufacturer, high cost-effectiveness

Description :

　　Hengyang

　　There are more and more people with cars, which means that there are also more and more vehicles on the road. Without traffic rules and traffic indicators, the vehicles on the road will inevitably be mixed and blocked, making it impossible for vehicles to pass. Therefore, drivers need to understand some traffic signs and instructions in order to drive better

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

Traffic sign manufacturerManufacturers of identification signs offer high cost-effectiveness

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Hengyang city, and we provide free technical guidance. Hengyang Road Traffic Sign Manufacturer, Hengyang Traffic Sign Production, Hengyang Road Sign Pole Processing, Hengyang Traffic Sign Pole, Hengyang Scenic Area Indication Sign Manufacturer, Hengyang Tourist Scenic Area Identification Sign Manufacturer, Hengyang Traffic Sign Manufacturer, Hengyang Traffic Sign Manufacturer, Hengyang Traffic Safety Sign, Hengyang Safety Warning Sign, Hengyang Traffic Sign Pole Customization, Hengyang Hot Dip Galvanized Traffic Sign Pole Manufacturer, Hengyang Multi pole Traffic Sign Pole, Hengyang Expressway Sign Pole Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Hengyang Traffic Sign Manufacturer

　　Information panel selection refers to the mechanical selection of a content to be displayed from several information panels, which can be divided into: rolling panel selection, which stores some information on a flexible and transparent drum (such as bus destination signs); Rotating panel selection is to draw three types of information on the three panels of the rotating Mitsubishi column; Reversible panel selection stores information on both sides of the tablet, which can be flipped over

　　Hengyang traffic sign manufacturer identification sign manufacturer cost-effective. This sign is located in an appropriate position in front of the intersection where vehicles must turn right, indicating that all vehicles are only allowed to go straight and turn left. This sign is located in an appropriate position in front of the intersection where vehicles must go straight and turn left. Going straight and turning right, turning left and right, driving on the right side of the road, driving on the left side of the road, indicating that all vehicles are only allowed to go straight and turn right

AfterSalesService :

• Traffic sign manufacturer