Mianyang Road Traffic Signs and Traffic Facilities Production Supplier Quotation Details

Description :

　　When the actual traffic flow in Mianyang is large, higher intensity reflective film should be used

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Mianyang city, and we provide free technical guidance. Mianyang Road Traffic Sign Manufacturer, Mianyang Traffic Sign Production, Mianyang Road Sign Pole Processing, Mianyang Traffic Sign Pole, Mianyang Scenic Area Indicator Sign Manufacturer, Mianyang Tourist Scenic Area Indicator Sign Manufacturer, Mianyang Traffic Sign Manufacturer, Mianyang Traffic Sign Manufacturer, Mianyang Traffic Safety Sign, Mianyang Safety Warning Sign, Mianyang Traffic Sign Pole Customization, Mianyang Hot Dip Galvanized Traffic Sign Pole Manufacturer, Mianyang Multi pole Traffic Sign Pole, Mianyang Expressway Sign Pole Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Mianyang Road Traffic Signs

　　What is the function of road traffic signs? Road traffic signs refer to specific information such as graphics, symbols, colors, and text used to guide and direct vehicles and personnel on the road, as well as safety facilities for controlling, warning, and guiding traffic

　　Mianyang Road Traffic Signs and Traffic Facilities Production Supplier Quotation Details

　　The tunnel on light sign is used to warn vehicle drivers to turn on the headlights when entering the tunnel and to drive carefully. It is located in an appropriate position in front of the tunnel entrance where there is no lighting or insufficient lighting. Only one tunnel sign and one tunnel on light sign need to be set up; Pay attention to the tidal lane warning sign, which is used to warn drivers that the tidal lane ahead is located at an appropriate position in front of the starting point of the tidal lane section

　　Next:

AfterSalesService :

• Road traffic signs