Dali Traffic Sign Pole Single Suspension Processing Factory saves money and effort

Description :

　　Dali

　　Cantilever traffic sign poles are suitable for the following situations:;

　　1. Difficulty in column installation;

　　2. The road is wide, the traffic volume is high, and large vehicles on the outer lane block the view of small vehicles on the inner lane;

　　3. Limited visibility or line of sight;

　　4. There are requirements for the landscape

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Dali city, and we provide free technical guidance. Dali Road Traffic Sign Manufacturer, Dali Traffic Sign Production, Dali Road Sign Pole Processing, Dali Traffic Sign Pole, Dali Scenic Area Indication Sign Manufacturer, Dali Tourist Scenic Area Identification Sign Manufacturer, Dali Traffic Sign Manufacturer, Dali Traffic Sign Manufacturer, Dali Traffic Safety Sign Manufacturer, Dali Safety Warning Sign Manufacturer, Dali Traffic Sign Pole Customization, Dali Hot Dip Galvanized Traffic Sign Pole Manufacturer, Dali Multi pole Traffic Sign Pole, Dali Expressway Sign Pole Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Dali Traffic Sign Pole

　　Standard Introduction: This part of GB 5768 specifies the general requirements for the classification, color, shape, characters, size, graphics, and design, manufacturing, installation, and construction of road traffic signs. This part applies to the production, testing, and installation of traffic signs on highways, urban roads, and places within the jurisdiction of the unit that allow the passage of motor vehicles, as well as squares, public parking lots, and other places used for public passage. Traffic signs installed in other places where motor vehicles pass and parking lots can be referred to for implementation

　　Dali Traffic Sign Pole Single Suspension Processing Factory saves money and effort

　　A sign attached to the main sign that serves as an auxiliary indicator, indicating time, vehicle type, area or distance, warning, reason for prohibition, and other types

　　Next:

AfterSalesService :

• Traffic sign post