Chengdu Road Traffic Signs and Road Signs Manufacturer Quotation Details

Description :

　　Chengdu

　　Driving safety reminder signs: used to remind drivers of some situations or driving behaviors that need to be paid attention to or avoided during the driving process, including behaviors prohibited by relevant laws and regulations, mainly including: a) no drunk driving sign; b) No littering signs; c) Quick turn deceleration sign; d) Slow down sign for sharp turns and downhill slopes; e) Wear seat belt sign; f) Large vehicle right side sign; g) Disable mobile phone logo while driving

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Chengdu, and we provide free technical guidance. Chengdu Road Traffic Sign Manufacturer, Chengdu Traffic Sign Production, Chengdu Road Sign Pole Processing, Chengdu Traffic Sign Pole, Chengdu Scenic Area Indicator Sign Manufacturer, Chengdu Tourism Scenic Area Indicator Sign Manufacturer, Chengdu Traffic Sign Manufacturer, Chengdu Traffic Sign Manufacturer, Chengdu Traffic Safety Sign Manufacturer, Chengdu Safety Warning Sign Manufacturer, Chengdu Traffic Sign Pole Customization, Chengdu Hot Dip Galvanized Traffic Sign Pole Manufacturer, Chengdu Multi pole Traffic Sign Pole, Chengdu Expressway Sign Pole Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Chengdu Road Traffic Signs

　　Focusing on traffic road signs, traffic sign poles, scenic tourist signs, road signs, signage, signal light poles, reflective films, the company has an experienced team in the production, construction, and installation of traffic signs, traffic sign poles, and traffic signal lights

　　Chengdu Road Traffic Signs and Road Signs Manufacturer Quotation Details

　　This sign indicates that only vehicles are allowed to drive on the right side of the road, and is located in an appropriate position in front of the intersection where vehicles must drive on the right side; This sign indicates that all vehicles are only allowed to drive on the left side of the road. It is placed in an appropriate position in front of the intersection where vehicles must drive on the left side

AfterSalesService :

• Road traffic signs