Hunan Zhongda brand water intake pump ship floating tube water intake pump station

Description :

　　Technical Description of Hunan Zhongda Brand Water Intake Pump Ship Floating Ship (Tube) Water Intake Pump Station

　　Overview of Water Pump Ship

　　The traditional way to build pump stations in Rivers and Lakes or reservoirs is to build dams first, drain the water in the area and build pump houses The installation of water pumps, valves, pipelines, controls, etc. is characterized by long construction periods, large workloads, high pump room costs, and the higher the water level drop, the higher the pump room cost. Traditional pump stations have a fixed water intake below the low water level, and the water source is the raw water from the bottom layer, which has a high sand content. The inlet pipe sinks deep into the bottom of the water, wasting materials, and is difficult to detect and clean in case of dirt blockage. The construction of pump stations has a significant impact on the environment and a low safety factor.

　　To overcome the shortcomings of traditional pump station construction and use, reduce costs and improve economic benefits, our company meets the requirements of different customers and combines them with actual geographical conditions Specially developed floating ship and float type water intake pump stations. The structure of the pump station is as follows: using a floating ship or floating deck as the working platform, water pumps, valves, pipelines, controls and other facilities are installed on the ship. The main outlet pipe of the pump station pipeline system is connected to the main pipeline on the shore through a pipeline installed on a floating box; Alternatively, a rotating bracket can be installed on the ship and connected to the shore through a rocker arm, and the water supply pipeline can be set up along the rocker arm and rotate together with it. Alternatively, a stepped movable connection can be used, and the main outlet pipe can be connected to the flange of the fork pipe laid on the shore through the movable flange on the metal hose to achieve water supply.

　　The floating ship (cylinder) type water intake pump station mainly includes floating ship (cylinder), water pump, motor unit, water pipeline, lifting device, pipe fittings, valves, electrical and other components. During the entire water level change process, the floating ship can naturally rise and fall with the height of the water level, and achieve long-term continuous water supply without being limited by the water level. The floating pump station adopts a PLC fully automatic control system, which is easy to operate and has no complex underwater engineering compared to civil pump stations There is also no significant amount of geotechnical engineering The hull can be prefabricated on site or manufactured by shipyards with ship production license qualifications. It has many advantages such as wide adaptability, high flexibility, fast project progress, short construction period, low cost, simple construction, convenient maintenance, low safety impact on the environment, and improved economic benefits. It is suitable for industrial, agricultural, and domestic water use with fast start-up and urgent water supply requirements.

　　Applicable conditions for water pump boats

　　The water level changes significantly Generally around 10-30m; The fluctuation speed is below 2m/h, and the water depth during the dry season is generally not less than 1.5? A water area with stable water flow, slow flow velocity, and less wind and waves.

　　The riverbank is relatively stable River sections with minimal changes in riverbed erosion and sedimentation, and suitable slope angles, as well as water sources for reservoirs and lakes. When the contact pipe adopts a stepped joint Is the slope angle generally 20 degrees? 30 degrees: When using a rocker arm joint Is the bank slope generally 40 degrees? 60 degrees to shorten the length of the connecting pipe.

　　A river section without the impact of floating trees, rafts, or boats.

　　Structural form of water intake pump ship

　　Float type connection structure/rocker arm type connection structure/stepped type connection structure/universal joint type connection structure

AfterSalesService :

• Water pump ship