Keli stainless steel weighing sensor DEF-SS-200kg 200kg high-precision S-type pressure sensor

Description :

　　Keli Stainless Steel Weighing Sensor DEF-SS-200kg 200kg High Precision S-Type Pressure Sensor Detailed Description: YOLO-LOADCELL, AVIC Weighing Sensor South China General Agent, Keli Weighing Sensor South China General Agent, ZEMIC Weighing Sensor Agent, KELI Brand Sensor Agent, AC Brand South China General Agent in the United States, various types of micro tension and pressure sensors, handheld digital force gauges, various force sensors, large tonnage force sensors, standard force gauges for measurement, torque sensors, welcome to inquire by phone;

　　Keli stainless steel weighing sensor DEF-SS-200kg 200kg high-precision S-type pressure sensor

　　Keli stainless steel weighing sensor DEF-SS-200kg 200kg high-precision S-type pressure sensor:

　　Product Overview:

　　--The shear stress measurement method can withstand tension and pressure. Good output symmetry, compact structure, easy installation, high precision, and good stability. Can be used to manufacture scales such as hook scales, hopper scales, and electromechanical combination scales.

　　--Suitable for material testing machines, batching scales, mixing plants, belt scales, packaging scales, etc;

　　--Safe and explosion-proof products, suitable for harsh environments and hazardous situations;

　　--Range: 20kg~10t;

　　--Sensitivity: 2.0 ± 0.002mV/V, 3.0 ± 0.002mV/V

　　--Recommended voltage: 10~12VDC

　　--Voltage: 15VDC

　　--Alloy steel material, internally sealed with adhesive, oil resistant, waterproof, corrosion-resistant, suitable for various environments.

　　--S-shaped beam structure design, with bi-directional tension and compression bearing, easy and flexible installation and use.

　　DEF-SS-100kg,DEF-SS-200kg,DEF-SS-250kg,DEF-SS-300kg,DEF-SS-500kg,DEF-SS-750kg,DEF-SS-1000kg,DEF-SS-2000kg,DEF-SS-3000kg,DEF-SS-5000kg。

　　Handle with care, especially for small capacity sensors made of alloy aluminum elastomers. Any impact or drop may cause significant damage to their measuring performance. For high-capacity weighing sensors, they generally have a large self weight, so it is required to use appropriate lifting equipment (such as chain hoists, electric hoists, etc.) as much as possible during transportation and installation. The mounting surface of the sensor base should be flat, clean, and free of any oil film, adhesive film, etc. The installation base itself should have sufficient strength and rigidity, generally requiring higher strength and rigidity than the sensor itself.

　　Horizontal adjustment: Horizontal adjustment has two aspects. One is that the installation plane of a single sensor mounting base needs to be adjusted horizontally with a level, and the other is that the installation surfaces of multiple sensor mounting bases should be adjusted to a horizontal plane as much as possible (using a level), especially in weighing systems with more than three sensors. The main purpose of this is to ensure that the loads borne by each sensor are basically the same. The loading direction of each weighing sensor is determined, and when we use it, we must load in this direction. Lateral forces, additional bending moments, and torque forces should be avoided as much as possible.

　　In any case, the power and control wires should be twisted together at a speed of 50 revolutions per meter. If the sensor signal wire needs to be extended, a specially sealed cable junction box should be used. If this type of junction box is not used and cables are directly connected (soldered ends), special attention should be paid to sealing and moisture resistance. After connection, the insulation resistance should be checked and meet the standard (2000-5000M). If necessary, the sensor should be recalibrated. If the signal cable is very long and high measurement accuracy needs to be ensured, a cable compensation circuit with a relay amplifier should be considered.

AfterSalesService :

• 200kg high-precision S-type pressure sensor