Shenzhen University 0.1 level standard force gauge 0-300kN S-type high-precision force sensor 50kN

Description :

Shenzhen University 0.1 level standard force gauge 0-300kN S-type high-precision force sensor 50kN detailed descriptionYouzhongli Company produces various types of large-scale weighing and force sensors. With strict process requirements, Youzhongli strictly controls each production and testing data. A large range sensor tests the production capacity and scale of a manufacturer. We strictly control the production process of 150t to 2000t large range sensors, which meet the national C3 level weighing, measuring force 0.1% level, and 0.3% level standards. They can pass the measurement and testing report of the National Institute of Metrology, with long-term stability and good repeatability. Please place an order in advance according to your needs.

　　Measurement type: force measurement

　　Adaptive force meter level: 0.1%

　　Input signal range: 4.0mV/V

　　Optional channel specifications: 6/24/40

　　Excitation output voltage: 10V DC

　　Display digit size: 6-digit to 1.0 inch

　　Rated display division: 300000

　　AD conversion rate: 50 times/second

　　Repeatability and linearity: 0.005% FS

　　Gain temperature drift coefficient: 5ppm

　　MV/V accuracy: 0.02% FS

　　Communication printing interface: RS232

　　Power supply specification: 220V-50Hz

　　Key points for the structure and selection of force sensors

　　This section provides a brief introduction to the structural styles and characteristics of commonly used force sensors. For more detailed performance and external dimensions, please consult our company. Sensors are described using the accuracy of full-scale error, while standard force gauges are described using the accuracy of equivalent error. Please note the difference between the two. For more detailed information, please refer to JJG391-2009 (Load Sensor Calibration Regulations), JJG144-2007 (Standard Force Gauge Calibration Regulations), and ISO376-2011 (Testing Machine Force Gauge Calibration Specifications);

　　S-type sensor: It is a commonly used structural form for measuring small and medium force values, and can be used for tension or pressure measurement with corresponding accessories. It has good metrological performance and moderate price. The range of measurement is 100N~200kN, and the optimal measurement range is 200N~50kN.

　　Single column sensor: It is a commonly used structure for measuring large and medium force values, with good measurement performance and small weight, and is easy to carry for compression applications. The range of measurement is 30kN~5MN, and the optimal range selection is 100kN~5MN.

　　Torque ring sensor: mainly used for measuring the pressure direction of medium to high force values, with excellent metrological performance, but with a large volume and weight. The range of measurement is 10kN~5MN, and the optimal range selection is 100kN~1MN. This type of sensor is suitable for vertical measurement but not for horizontal measurement due to the lack of fixed screw holes at the bottom.

Shenzhen University 0.1 level standard force gauge 0-300kN S-type high-precision force sensor 50kN image：

AfterSalesService :

• S-type high-precision force sensor 50kN