Discounted Promotion Multi functional Sprinkler Truck Price Dongfeng Fog Cannon Sprinkler Truck Price

Description :

　　 Our company promises that if you order our sprinkler series products, we will deliver them to your location and handle the full set of driving procedures.We would prefer if you could come to our factory for on-site inspection and business negotiation. All products produced and sold by our company, including the chassis, can be covered by joint warranty at national service stations. The dedicated parts are covered by a three guarantee service for one year, with after-sales service available within 48 hours. We are responsible for lifelong maintenance and provide lifelong free technical services.

　　20 cubic meter power sprinkler truck product price is durable and long-lasting

　　Precautions for using sprinkler trucks

　　When the sprinkler truck uses a river ditch or pond as a water source, be sure to submerge all the ends of the suction pipe into the water. To avoid inhaling stones or large amounts of sediment and debris, a filtering device is generally installed at the end of the suction pipe. It is strictly prohibited to remove the filtering device when absorbing water. If the water source is shallow, it is necessary to dig deeper at the suction point in advance to ensure that there are no impurities or air intake. The water pumps of different sprinkler trucks have different requirements for the water source. The clear water pump requires that there should be no impurities in the water, while the turbid water pump requires that there should be no stones or excessive sediment in the water.

　　2. Before each suction of the centrifugal water pump, a certain amount of water must be added to the pump, and the water inlet must be closed after adding. When using a self-priming water pump for the second time, it is necessary to add water, but there is no need to add water in the future.

　　When absorbing water, the inlet pipe system must maintain a certain degree of vacuum in order to suck water into the tank. The inlet pipe system must be sealed reliably, the hose must not be damaged, and the hard pipe must not have cracks, otherwise there will be air leakage, which will result in the inability to suction water.

　　3. The power take-off device of the sprinkler truck must be engaged when parking, whether before absorbing water or before spraying water.

　　Before winter arrives, the water in the water pump and pipes should be emptied to prevent freezing and cracking. In northern China, construction is generally not carried out in severe winter, so after the construction is completed, the water in the pump and pipe should be immediately drained to prevent future problems.

　　4. The position of the sprinkler head in front of the sprinkler is relatively low, close to the ground, and the spraying pressure is high, which can be used to flush the road surface; The position of the rear nozzle is relatively high (usually one on each side of the sprinkler truck), and the sprinkler surface is wide, which can be used for road construction watering. When using the rear nozzle, the front nozzle should be closed; When using an adjustable nozzle for spraying water, the spraying width can be adjusted as needed. The wider the watering width, the less overlap in the middle, and the more uniform the watering density.

　　5. During use, it is necessary to regularly lubricate the lubrication points of the transmission assembly and tighten the connection points frequently to ensure normal use.

　　The water tank of the sprinkler truck is equipped with a sewage pipe, and the inlet of the pipe is the point of the water tank. After a period of use, the drain switch should be turned on regularly to remove any debris accumulated in the tank until the water becomes clear.

AfterSalesService :

• water truck