Copper Accelerated Acetic Acid Salt Spray Test Chamber Chemical Coating Oxidation Salt Spray Test Machine
Category:
Instrumentation/Test chamber and climate environment equipment/Salt spray test instrument
Model:
HE-YW-200
Brand:
Haoen Instrument
model:
HE-YW-200
type:
Salt water spray tester
studio dimensions:
2000×1000×600
Is it a cross-border source of goods:
No
Retail Price
1,000.00USD
重量
kg
- Product Description
-
model HE-YW-200
type Salt water spray tester
studio dimensions 2000×1000×600
Is it a cross-border source of goods No
Description :
1Copper accelerated acetate salt spray test chamberTechnical Specifications
model
HE-YW-60
HE-YW-90
HE-YW-120
HE-YW-160
HE-YW-200
capacity
108 liters
270 liters
600 liters
960 liters
1200 liters
Inner box size (mm)
600×450×400
900×600×500
1200×1000×500
1600×1000×600
2000×1000×600
Dimensions (MM)
1070×600×1180
1410×880×1280
1900×1300×1400
2300×1300×1500
2700×1300×1500
Salt bucket capacity
15 liters
25 liters
40 liters
40 liters
40 liters
Use power supply
AC 220V 50HZ 15A
AC 220V 50HZ 15A
AC 220V 50HZ 20A
AC 220V 50HZ 20A
AC 220V 50HZ 30A
Laboratory temperature
Neutral salt water test method (NSS ACSS): 35 ℃± 1 ℃; Acid salt water test method (CASS): 50 ℃± 1 ℃
pressure tank temperature
Neutral salt water test method (NSS ACSS): 47 ℃± 1 ℃; Acid salt water test method (CASS): 63 ℃± 1 ℃
salt concentration
Neutral salt water test method (NSS ACSS): Sodium chloride concentration 5%;
Acid salt water test method (CASS): Add 0.26 grams of copper chloride (CuC12. h20) per liter of 5% sodium chloride solution
spray pressure
1.00±0.1kgf/cm2
Salt spray collection amount
1-2mL/80cm21h (collect for at least 16 hours and take the average)
relative humidity
85% H.R or above
Spray mode
Continuous spray or intermittent spray (optional)
IIChemical coating oxidation salt spray testing machineSpray mode:
1. Adopting Bernoulli principle to absorb saline water and then atomize it uniformly. There is no phenomenon of blocking crystallization, ensuring continuous operation of the test.
2. The nozzle is made of tempered glass, and the spray amount and spray angle can be adjusted.
3. The amount of spray is 1-2ml/h adjustable (mL/80cm21hr standard requires testing for 16 hours to get the average value). The measuring cylinder is installed in an embedded way, with beautiful and neat appearance, convenient observation and reduced instrument installation space.
4. Programmable spray with adjustable time of 1S-9999H (including continuous spray and intermittent spray)
3、 Salt spray test
The laboratory simulated salt spray test can be divided into three categories: neutral salt spray test, acetate salt spray test, and copper salt accelerated acetate salt spray test.
(1) Neutral salt spray test (NSS test) is an accelerated corrosion testing method that has been widely used in various fields for a long time. It uses 5% saline solution, and the solution PH value is adjusted in the neutral range (6.5~7.2) as the solution for spray. The experimental temperature is set at 35 ℃, and the settling rate of salt spray is required to be 1-2ml/80cm21hr.
(2) The Acetate Salt Spray Test (ASS Test) was developed based on the Neutral Salt Spray Test. It involves adding some glacial acetic acid to a 5% solution to lower the pH value to around 3, making the solution acidic. The resulting salt spray also changes from neutral to acidic. Its corrosion rate is about three times faster than the NSS test.
(3) The Copper Salt Accelerated Acetate Salt Spray Test (CASS Test) is a recently developed rapid salt spray corrosion test abroad. The test temperature is 50 ℃, and a small amount of copper salt, copper chloride, is added to the salt solution to strongly induce corrosion. Its corrosion rate is approximately 8 times faster than the NSSS test.
AfterSalesService :
Key words:- salt spray test chamber
More Products
