IP56 sand and dust test device, anti sand and dust test box, sand and dust resistance test box, Haoen test

Description :

　　1、 Purpose:

IP56 Sand and Dust Test DeviceSuitable for testing whether electrical products, casings, and seals can ensure good performance of equipment and components in high dust environments, and can simulate various environments with high dust levels realistically. Dust falls vertically onto the sample instead of laminar flow. The dust is collected through a vibrating funnel and concentrated into a vortex air pump, achieving a top-down circulation of dust blowing.

　　According to the standard requirements, this test chamber uses artificial simulation of dust environment to test the dustproof ability of the tested product. The specific requirements and qualification criteria should be in accordance with GB4208-2008 (IEC60529-2001) or relevant product standards

　　The dust-proof test chamber is designed and manufactured in accordance with GB4208-2008 (equivalent to IEC60529-2001) "Degrees of Protection Provided by Enclosures (IP Code)", and is suitable for conducting sand and dust tests on electrical products with characteristic numbers 5 and 6 (IP5 and IP6).

　　IIfeature

　　1. The experimental system structure design is advanced and reasonable, in compliance with GB2423, GB4706, GB4208, DIN

　　2. The main functional components of this test box are equipped with advanced and reliable technical principles, and the noise and energy efficiency are well controlled - its performance can replace similar foreign products.

　　3. Color touch screen human-machine interface, programmable controller, automatic control of machine operation.

　　IIISand and dust resistance test chamberTechnical Specifications:

　　Model: HE-SC512-IP56

　　1. Capacity:

　　HE-SC512-IP56：500L

　　HE-SC1000-IP56：1000L

　　2. Inner box size:

　　HE-SC500-IP56: Width 800 x Height 800 x Depth 800mm

　　HE-SC1000-IP56: Width 1000 x Height 1000 x Depth 1000mm

　　3. Outer box size:

　　HE-SC500-IP56: Width 1400 x Height 1710 x Depth 950mm

　　HE-SC1000-IP56: Width 1600 x Height 1910 x Depth 1150mm

　　4. Weight: HE-SC500-IP56:100KG, HE-SC1000-IP56:150KG

　　5. Power supply: AC 220V 2KW

　　4、 Performance parameters:

　　4.1. Test environmental conditions: ambient temperature of+5~+28 ℃, relative humidity ≤ 85%

　　4.1. Testing methods: GB2423, GB4706, GB4208, DIN

　　4.3. Temperature inside the box: 15~45 ° C

　　4.4. Relative humidity inside the box: 45%~75% RH

　　4.5. Net nominal diameter: 50um

　　4.6. Nominal spacing between lines: not greater than 70um

　　4.7. Dust consumption inside the box: 2Kg/m3

　　4.8. Airflow velocity: ≤ 2m/s

　　4.9. Dust blowing time: 0~9999.9h can be set

　　4.10. Sensor: Test box temperature sensor: PT100, baking dust temperature sensor: PT100

　　4.11. Vibration time: adjustable from 1 to 9999min

　　4.12. Test time: 1 minute to 99 hours and 59 minutes

AfterSalesService :

• Sand and dust testing device