125L simulated high-altitude low pressure test chamber, simulated 20000 meter high-altitude atmospheric pressure test chamber, room temperature vacuum test chamber

Description :

　　1125L simulated high-altitude low pressure test chamberinstallation and debugging

　　During transportation and handling, be careful not to collide with the box or apply force on the glass.

　　2. The equipment should be placed steadily after landing, and any unevenness on the ground should be corrected.

　　3. Do not use this device in direct sunlight or in areas with high temperatures and humidity.

　　4. This device should be kept away from electromagnetic interference sources.

　　When this device is operating normally, the placement of the contents inside the box should not affect air circulation.

　　6. This equipment belongs to high-power high-temperature equipment, and the power supply should use a three core socket of 16A or above and have a grounding wire.

　　7. Flammable and volatile chemicals should not be placed inside the box.

　　8. If there is any odor, smell, smoke or other issues during use, please immediately turn off the power. Users should not blindly repair and should promptly notify our after-sales service department.

　　9. The inner lining of the box wall and the surface of the equipment should be wiped regularly to maintain cleanliness and increase the transparency of the glass. Do not use acid, alkali, or other corrosive solutions to wipe the outer surface.

　　10. If the equipment is not used for a long time, the power cord should be unplugged and it should be operated regularly (usually once a quarter) for 2-3 days according to the usage conditions to remove moisture from the electrical parts and avoid damaging the relevant components.

　　IISimulate a 20000 meter high-altitude atmospheric pressure test chamberTechnical Specifications

　　1. Inner box material: SUS304 stainless steel

　　2. Outer box material: SECC steel plate, powder coated paint treatment

　　3. Bottom: equipped with universal wheels

　　4. Visual window: Tempered glass with explosion-proof film

　　5. Timer: Three digit display from 0s to 999h (H hours, M minutes, S seconds can be switched)

　　6. Control mode: microcomputer PID+SSR+Timer

　　7. Vacuum degree: ≤ 133pa

　　8. Vacuum degree range: adjustable from -100Kpa to 0Kpa

　　9. Pressure range: 11.6KPa (vacuum gauge reading<-0.0884Mpa)

　　10. Pressure fluctuation: ≤ 5%

　　IIIRoom temperature vacuum test chamberStructural features:

　　1. The box is made of cold-rolled steel plate, with a surface coated with electrostatic powder coating, which is hard and firm, and has * anti rust ability.

　　2. The studio is made of stainless steel plate, with rounded corners, smooth, fluent, and easy to clean.

　　3. The space between the box and the workspace is filled with ultra-fine glass wool insulation material, which has good insulation function and effectively ensures stable and accurate temperature.

　　4. The box door is made of double-layer tempered glass structure, which allows clear observation of the items inside the box and has good insulation effect, effectively avoiding burns to the operators.

　　5. A rubber sealing ring is installed between the studio and the glass door to ensure a high degree of vacuum inside the box.

　　6. The vacuum gauge is digital and can be manually started, stopped, and decompressed.

　　7. The temperature control is manufactured using microcomputer intelligent digital technology, with industrial PID, self-tuning, and four digit dual LED indication functions. It has high temperature control accuracy and easy operation.

AfterSalesService :

• Simulated high-altitude low-pressure test chamber