Battery low voltage high-altitude simulation test box, simulated high-altitude test box, simulated high-altitude test box

Description :

　　1Low voltage high-altitude simulation test chamber for batteriesFeatures:

　　Vacuum environment can lower the boiling point of liquids, and vacuum drying can be applied to thermosensitive substances, powders or other granular samples, which can effectively shorten the drying time.

　　The heating element is located on the partition inside the box, which reduces the heating time by 50% compared to traditional vacuum drying boxes.

　　LCD microcomputer intelligent PID temperature controller with multiple data displays, menu style operation interface, simple and easy to use, and low temperature control fluctuations.

　　It has functions such as temperature correction, over temperature alarm, timing setting, call recovery, parameter memory, etc.

　　The outer shell is made of cold-rolled steel plate, and the surface is coated with advanced spraying technology. The inner liner is made of stainless steel material, and the four corner semi-circular arc design is easy to clean.

　　The insulation material between the studio and the outer box is fiberglass insulation material, with a thickened insulation layer for good insulation effect. The heat loss of the inner tank is minimal, and the design between the studio and the outer box is reasonable, reducing the loss of heat sources. The double-layer tempered glass sealed door is convenient for observing the items inside the studio.

　　The tightness of the box door can be adjusted freely, and the sealing ring is an integral silicone rubber seal that ensures high vacuum inside the box without air leakage.

　　Aluminum shelves made by special stamping processes have high temperature resistance and fast thermal conductivity.

　　Storage, heating, testing, and drying in a vacuum environment filled with inert gas will not cause oxidation.

　　IISimulated high-altitude test chamberTechnical Specifications

　　1. Inner box material: SUS304 stainless steel

　　2. Outer box material: SECC steel plate, powder coated paint treatment

　　3. Bottom: equipped with universal wheels

　　4. Visual window: Tempered glass with explosion-proof film

　　5. Timer: Three digit display from 0s to 999h (H hours, M minutes, S seconds can be switched)

　　6. Control mode: microcomputer PID+SSR+Timer

　　7. Vacuum degree: ≤ 133pa

　　8. Vacuum degree range: adjustable from -100Kpa to 0Kpa

　　9. Pressure range: 11.6KPa (vacuum gauge reading<-0.0884Mpa)

　　10. Pressure fluctuation: ≤ 5%

　　IIISimulated high-altitude test chamberStructural features:

　　1. The box is made of cold-rolled steel plate, with a surface coated with electrostatic powder coating, which is hard and firm, and has * anti rust ability.

　　2. The studio is made of stainless steel plate, with rounded corners, smooth, fluent, and easy to clean.

　　3. The space between the box and the workspace is filled with ultra-fine glass wool insulation material, which has good insulation function and effectively ensures stable and accurate temperature.

　　4. The box door is made of double-layer tempered glass structure, which allows clear observation of the items inside the box and has good insulation effect, effectively avoiding burns to the operators.

　　5. A rubber sealing ring is installed between the studio and the glass door to ensure a high degree of vacuum inside the box.

　　6. The vacuum gauge is digital and can be manually started, stopped, and decompressed.

　　7. The temperature control is manufactured using microcomputer intelligent digital technology, with industrial PID, self-tuning, and four digit dual LED indication functions. It has high temperature control accuracy and easy operation.

AfterSalesService :

• Low pressure high-altitude simulation test chamber