MCZ200 Coal Mine Tunnel Anchor Rod Load Gauge Jiabang Mining Anchor Rod Load Gauge

Description :

　　MCZ200 Mining Anchor Cable Load GaugeMain technical indicators:

　　Range: 0-200KN Total length: L ≈ 285mm Measurement accuracy: Level 2.5 Conversion factor K: 5.26

　　IIMCZ200 Mining Anchor Cable Load GaugeUsage:

　　1. Used for anchor rod support, the anchor rod should be placed perpendicular to the support surface, and protective plates, pillow boxes, and anchor rods should be used as much as possible

　　Align to ensure even force distribution.

　　2. For non anchor pressure measurement applications, the pillow box is clamped between two disc-shaped protective plates, and the direction of the measured pressure should be aligned with the pillow surface

　　Vertically, the center of the applied force should coincide with the center of the pillow surface as much as possible.

　　MCZ200 Mining Anchor Cable Load GaugeUsage and maintenance matters:

　　1. Local force is strictly prohibited, and other parts outside the pillow box must not be subjected to force.

　　2. The product is equipped with a pressure gauge, and strong vibrations, impacts, and drops are strictly prohibited to avoid damage or reduced accuracy.

　　3. For ease of observation, copper pipes can be bent, but dead bending should be avoided, and frequent bending should be avoided to avoid affecting their lifespan.

　　4. If oil leakage is found at the pressure gauge joint nozzle, oil should be replenished, the seal should be replaced, and recalibration should be carried out.

　　5. Store in a cool, dry, and well ventilated place.

AfterSalesService :

• Anchor rod and anchor cable dynamometer for coal mine tunnels