SY-40 Single Pillar Pressure Gauge Stainless Steel Material Pressure Boosting Single Pillar Force Gauge

Description :

　　SY-40 Single Hydraulic Support Side Pressure Gauge CarryingThe prominent advantages of the table are:

　　(1) The use of injecting liquid into the support column to measure the pressure of the liquid inside the column effectively ensures the safety of the support;

　　(2) It can automatically exhaust and can be filled with liquid for pressure measurement by shaking the handle once. The operation is very convenient;

　　(3) Simple structure, few sealing components, not afraid of rust, reliable performance, long service life;

　　(4) Small size, light weight, and easy to carry;

　　(5) Can continuously fill the pillar with fluid to increase its pressure. It is currently the ideal instrument for detecting the pressure of individual hydraulic supports.

　　IISY-40 Single Hydraulic Support Side Pressure Gauge CarryingProduct Usage

　　The SY-40B single hydraulic prop pressure gauge is used to detect the initial support force (working resistance) of the single hydraulic prop. The SY-60B (pressurized) single pillar working resistance detector can detect the pressure of the pillar and also increase the pressure of the pillar, ensuring that there is no unloading (lowering) of the pillar during detection.

　　SY-40 Single Hydraulic Support Side Pressure Gauge CarryingInstrument precautions:

　　After the pressure measurement is completed, the plunger should be in a fully retracted state;

　　2. Pay attention to the cleanliness of the front end of the pressure gauge and the fitting of the three-way valve, and do not stick any oil stains, coal slag or other granular objects to avoid blocking the outlet of the pressure gauge;

　　The outlet hole of the 3-unit pillar pressure gauge should be tightened inward, without looseness or excessive extension

　　If it is found that the "O" - shaped sealing ring or retaining ring on the plunger is worn and damaged, the plunger should be removed and replaced with a new sealing ring or retaining ring;

　　fiveSY-40 Boosting Hydraulic Support Pressure GaugeIf the pressure gauge is not used for a long time after using emulsion, a small amount of emulsion oil or other oil should be injected into the hydraulic transmission system inside the shell from the infusion hole of the storage cylinder to prevent rusting;

　　When carrying and using a single pillar pressure gauge, be careful not to collide with the pressure gauge cover, and do not disassemble the pressure gauge at will to avoid damage or malfunction;

　　When pushing the handle, do not apply too much force to avoid damaging the pressure gauge due to rapid pressure increase;

AfterSalesService :

• Single pillar pressure gauge