BE20 pneumatic wrench, lightweight, energy storage impact pneumatic wrench

Description :

　　Pneumatic wrenches have a series of characteristics such as safety and explosion resistance, high torque, light weight, small size, high efficiency, simple structure, and easy maintenance. It can meet the requirements of stable output speed under large fluctuations in wind pressure underground in coal mines, and can be used for tightening and disassembling nuts of U-shaped steel supports and anchor rod supports, mixing resin anchor rods, and assembling and disassembling nuts of other mechanical and electrical equipment. It can improve the performance of U-shaped steel supports and anchor rod supports and ensure the quality of support.

　　Precautions for using BE20 pneumatic wrench:

　　1. The compressed air entering the wind should be clean and free of dirt, and contain a certain amount of lubricating oil. The inner diameter of the trachea should not be less than the specified size and should not be too long to prevent the air pressure entering from being too low. The normal working air pressure of the air is 0.5Mpa, and the air pressure entering should not be too high, otherwise it may cause overload and shorten the service life of the components. After use, block the air inlet with a wooden plug to prevent dirt from entering the machine.

　　If a low number of impacts or secondary impacts are found during use, the machine should be stopped immediately for inspection.

AfterSalesService :

• pneumatic wrench