LJO 125 * 210 * 110 mining machine cable clamp, lightweight O-type mining cable clamp, made of plastic material

Description :

LJO 125 * 210 * 110 mining machine cable clamp, lightweight O-type mining cable clamp, made of plastic material

　　Produced by our factoryLJO 125 * 210 * 110 cable clamp for coal mining machineIt is made by injection molding nylon 66 with flame retardant and antistatic agent (nylon 66+flame retardant+antistatic agent) and steel frame,O-type mining cable clampAccording to the requirements of the coal mining machine working face, a protective channel for protecting cables or water pipes needs to be connected through pins or bolts.

　　1LJO 125*210*110Cable clamp for coal mining machinestructure

O-type mining cable clampIt is a composite structure composed of four injection molded plates with embedded steel frames. The assembly method is to rotate and fix the embedded metal rods, and the connection method is to use special bolts. The injection molding material is wear-resistant engineering plastic, and the embedded metal frame is made of stamped steel plates and cold drawn round steel. The connection size, as well as the diameter of the connecting bolts and pin holes, have been standardized, and the series can be interchangeable and modified into various specifications.

IILJO 125*210*110Cable clamp for coal mining machineInstallation and use:

　　1. First, insert the T-shaped plugs of the horizontal connecting plate into the T-shaped slots of the left and right clamping plates, so that the semi-circular positioning holes of the T-shaped plugs are concentric with the positioning pin holes of the clamping plates. Insert the positioning pins into the positioning pin holes to form a cable clamp slot

　　2. Align the front and rear holes of the multi section cable tray, insert the connecting pin shaft from the inside out into the holes, install the split pin, and connect them into a section of cable tray. The final length can be determined according to the needs of the coal mining face.

　　3. Place the cable into the clamp groove and connect it with a transverse plate as shown in the diagram to form a closed cable clamp, thus forming a complete cable clamp that meets the requirements of the coal mining machine.

IIILJO 125*210*110Cable clamp for coal mining machineProduct Features:

O-type cable clampLight weight, small size, compact structure, easy and fast installation, simple maintenance and repair, long service life, high tensile strength, impact resistance, etc. Its advantage is that the inner lining steel skeleton carries drag force, protecting cables or water pipes from external forces. Nylon 66 is added with flame retardant, anti-static and other additives, which have flame retardant and anti-static effects. Adjacent cable clamps are easy to connect and can be extended as needed according to the working face of the coal mining machine. They protect cables or water pipes from reliable operation during towing, prevent breakage or damage, improve production efficiency, and reduce maintenance costs.

　　Our company producesLJO 125*210*110Cable clamp for coal mining machineOur products are rich and diverse, with a complete range of models. Our products are sold to coal mines of all sizes across the country and have been widely used, recognized, and supported. We look forward to your call for consultation.

AfterSalesService :

• Cable clamp for coal mining machine