Double Stretching Machine for Thin Film Manufacturer of Double Stretching Machine for Thin Film
Category:
Rubber and plastic/Plastic machinery/Plastic molding machine
Model:
FOCI
Brand:
Guangzhou Putong
Retail Price
1,000,000.00USD
重量
kg
- Product Description
-
Description :
Product Introduction
POTOP film biaxial stretching machine can produce thick film samples of biaxial stretching film materials with a thickness of less than 4mm and 100 square meters. According to the required stretching ratio, film forming tensile tests can be conducted at suitable temperature and time for physical and chemical testing and analysis in the laboratory. Based on the performance of the sample film, a variety of additives and formulas can be re determined. Then applied to the production line, it can greatly reduce the cost of trial production. Any crystalline and amorphous polymer that can be biaxially stretched into thick sheets can be statically stretched on this machine, such as PET, PA, PP, PS, PETG, PPS, PI, PEEK, and so on.
Equipment performance and technical indicators
project
Content
indicator parameters
overall machine performance
Applicable Materials
PET, PA, PP, PS, etc
Sample thickness range
0.02-4mm
Sample size
80×80mm
Sample size
110×110mm
Stretching speed
300mm/s
stretching direction
XY axis synchronous stretching at the same magnification; XY axis synchronous stretching with different magnifications; uniaxial tension
stretch ratio
10:1
Number of fixtures/axis
7 of them
Fixture type
Manual mechanical clamp
tensile force
1000N
Number of ovens
Two, one for preheating and stretching, and one for annealing (optional)
clamping method
manual
hot air temperature
250℃/400℃
Temperature control accuracy
±1℃
Drive Type
Siemens servo motor
Length × Width × Height
Approximately 5300 × 2300 × 1700mm
Total weight
About 1700kg
Working Voltage
3-phase AC 380V ± 10%, 50Hz
Total machine power
About 70kW
Control method
Siemens PLC control
AfterSalesService :
Key words:- Thin film biaxial stretching machine
More Products
