How to operate the biomass wood chip burner for the renovation of a 3.6 million kcal 6-ton boiler in Wuhan City

Description :

　　How to operate the biomass wood chip burner for the renovation of a 3.6 million kcal 6-ton boiler in Wuhan City

　　How to operate the biomass wood chip burner for the renovation of a 3.6 million kcal 6-ton boiler in Wuhan City

　　On the fuel combustion device, there are simultaneously connected primary air vents, secondary and tertiary air vents, and primary air regulating ports and secondary and tertiary air regulating ports are respectively provided at the inlet ends of the primary and secondary air vents. The combustion device adopts three reasonable air distribution, which can completely burn off the fuel. Oxygen is added by a blower, and the firepower can be adjusted. The operation is convenient and can significantly reduce the labor intensity of workers, and is conducive to environmental protection. Biomass fuel enters the combustion furnace through an automatic feeding pipe for combustion. At the same time, the remaining ash residue after combustion is pushed out of the furnace, avoiding slagging and automatically removing slag, saving the use cost.

　　Principle structure diagram of 12 million kcal coking particle combustion machine in Changde City

　　With the tight energy situation such as power shortage, oil shortage, rising electricity prices, and increasing environmental pollution, various industries have gradually strengthened their awareness of the use of renewable energy, among which the utilization of biomass energy is currently a feasible solution. Biomass is a substance that exists on Earth, including all animals, plants, and microorganisms, as well as many organic matter derived, excreted, and metabolized from these living substances. Various types of biomass.

　　Changde grain dryer, biomass wood chip burner, second-hand

　　2. To determine the quality of a dryer, it is necessary to first understand and be familiar with the working principle and basic structure of the dryer. At present, although there are various types of grain dryers in the domestic market, their working principle is to use mechanized means to move grains up and down or smoothly, supplemented by hot air circulation to penetrate and evaporate excess moisture inside the grains. Based on this working principle, it is not difficult for us to grasp its mechanical structure, which includes several parts: grain lifting or conveying system, heat source supply and conveying system, dryer main structure, and automation control system. After mastering these basic knowledge, we can then determine the quality of each item in the following order. One is to check whether the motors, bearings, conveyor belts, and their supporting components used in the grain lifting or conveying system are products of legitimate large factories, and whether their quality and performance are excellent. The second is to look at the heat source system, which not only depends on the quality of the key products such as the burner, hot air stove, and exhaust motor equipped, but also on the material and welding quality of the hot air pipe that matches it, to ensure that its durability and airtightness meet the requirements. The third is to determine the quality of the main structure of the dryer. As this part is responsible for most of the mechanical operation process (i.e. grain drying process), its quality is more related to the overall operation of the machine. To determine its quality, special attention should be paid to the selected materials, specifications, and processes. At present, the commonly used grain storage bins for drying machines in the market mostly use 1.5-2mm cold-rolled sheets, but it has also been found that some brands use less than 1.2mm sheets. It is difficult to ensure its load-bearing capacity using such thin and light boards; The differences in surface treatment processes for sheet metal and welded components are more prominent. Some advanced enterprises have adopted baking paint or even spray painting processes, but most manufacturers still use spray painting processes. Some brands even produce poorly in this regard, greatly reducing the overall durability of the machine. In addition, it is necessary to carefully evaluate the electrical control system of the dryer. The electronic information control system is the heart and core component of the dryer, and its quality and performance directly determine the overall performance and even the ability to operate normally and stably. Although it is not easy to make a judgment on the surface before use, it can be estimated from its nameplate information. At present, several powerful large enterprises in the market have achieved self-developed control systems, and the overall performance can be trusted; However, most small and medium-sized enterprises do not have their own research and development capabilities and can only outsource configuration. There are even some brands that only install a few simple manual switches and do not have automatic control systems. When purchasing, users must be careful and carefully check the supplier information of their electronic control systems.

　　The introduction on how to operate the biomass wood chip burner for the renovation of a 3.6 million kcal 6-ton boiler in Wuhan is as follows. For more knowledge, please feel free to leave a message for consultation. We provide free renovation plan design and budget.

AfterSalesService :

• Biomass wood chip burner