2.4 million kcal 4-ton boiler renovation in Taizhou City, replacing pellet with biomass wood chip burner

Description :

　　2.4 million kcal 4-ton boiler renovation in Taizhou City, replacing pellet with biomass wood chip burner

　　2.4 million kcal 4-ton boiler renovation in Taizhou City, replacing pellet with biomass wood chip burner

　　Explore further cooperation between both parties. In the next few days, they will be walking and watching, instantly sending back some information. We will edit and serialize it in a timely manner. Please stay tuned. 2.1.3 Carbonization molding can be divided into two types based on the process flow: molding first and then carbonization, and carbonization first and then molding. The process of carbonization before molding is to first carbonize biomass raw materials into powdered charcoal, then add a certain amount of binder and use a compression molding machine to extrude them into finished charcoal of a certain specification and shape. The process flow includes crushing raw materials. This inspection includes impurity removal, carbonization, addition of adhesive, extrusion molding, and drying. Visit and learn about the follow-up visit invited by the Austrian Biomass Particle Fuel Association last year. The first step is to use a compression molding machine to compress loose and fine crop waste into fuel rods with a certain density and shape, and then use a carbonization furnace to carbonize the fuel rods into machine-made charcoal. The process flow includes: raw material crushing, drying, compression molding, carbonization, and cooling.

　　900000 kcal biomass wood chip burners are selected in Qianjiang City

　　Based on the common and widely used biomass pellet fuels in the current market, they can be roughly divided into four categories according to the types of raw materials: biomass wood, biomass straw, biomass rice husk, biomass peanut shell, etc. Less common are cow manure sawdust mixed pellets, bamboo chips, cotton stalks, and chili stalks, which are relatively rare.

　　Operation method of controller for 900000 kcal biomass burner in Xiangyang City

　　Moreover, it is cost-effective and has no pollution to the environment, with zero CO and SO emissions. It is a renewable energy source that can be recycled and can replace wood, coal, and natural gas. And the operating cost is only half of that of gas. The large amount of raw materials generated by agriculture in our country provides strong material support for the promotion of biomass boilers. Installation of induced draft dust removal system for biomass boiler burner: Under the action of the induced draft fan, the high-temperature flue gas generated after combustion enters the dust collector for purification through convective heat exchange in the smoke pipe, and is then discharged from the chimney through the induced draft fan. The installation of biomass boiler burners as fuel for boilers. It has a long burning time. Strengthen the combustion furnace to maintain high temperature.

　　The introduction of replacing pellets with biomass wood chip burners for the renovation of a 2.4 million kcal 4-ton boiler in Taizhou City is as follows. For more knowledge, please feel free to leave a message for consultation. We provide free renovation plan design and budget.

AfterSalesService :

• Biomass wood chip burner