The working principle of the biomass wood chip burner for the transformation of a 1.8 million kcal 3-ton boiler in Xuzhou City
Category:
energy/Bioenergy/Biomass burner
Model:
YH-R360-W
Brand:
Yuanheng
Retail Price
10,000.00USD
重量
kg
- Product Description
-
Description :
The working principle of the biomass wood chip burner for the transformation of a 1.8 million kcal 3-ton boiler in Xuzhou City
The working principle of the biomass wood chip burner for the transformation of a 1.8 million kcal 3-ton boiler in Xuzhou City
Moreover, it is cost-effective and has no pollution to the environment, with zero CO and SO emissions. It is a renewable energy source that can be recycled and can replace wood, coal, and natural gas. And the operating cost is only half of that of gas. The large amount of raw materials generated by agriculture in our country provides strong material support for the promotion of biomass boilers. Installation of induced draft dust removal system for biomass boiler burner: Under the action of the induced draft fan, the high-temperature flue gas generated after combustion enters the dust collector for purification through convective heat exchange in the smoke pipe, and is then discharged from the chimney through the induced draft fan. The installation of biomass boiler burners as fuel for boilers. It has a long burning time. Strengthen the combustion furnace to maintain high temperature.
Detailed drawing of biomass burner for the renovation of a 15 ton boiler with a capacity of 9 million kcal in Jingzhou City
The process flow of biomass solidification fuel system is as follows: biomass raw materials are crushed by a crusher, and then dried or sprayed with water (different solidification equipment have different requirements for the moisture content of raw materials. When the moisture content of raw materials is high, they need to go through a drying equipment, and when the moisture content of raw materials is too low, spray water is used to remove the moisture content of raw materials). The raw materials that meet the requirements are then solidified by a rod making unit to produce biomass forming fuel. If further deep processing of the product is needed, carbonization can be carried out to produce high calorific value products of mechanism carbon.
Detailed drawing of Enshi Tujia and Miao Autonomous Prefecture drum drying biomass burner
3. The secondary feeding device is safe and worry free, avoiding the safety hazards of biomass boiler reignition, while reducing the load on the feeding system and correspondingly reducing the electricity consumption of the feeding motor.
The introduction of the working principle of the biomass wood chip burner for the transformation of a 1.8 million kcal 3-ton boiler in Xuzhou City is as follows. For more knowledge, please feel free to leave a message for consultation. We provide free design and budget for the transformation plan.
AfterSalesService :
Key words:- Biomass wood chip burner
More Products
