Renovation of a 15 ton boiler with a capacity of 9 million kcal for biomass wood chip combustion in Xiangxi Prefecture

Description :

　　Renovation of a 15 ton boiler with a capacity of 9 million kcal for biomass wood chip combustion in Xiangxi Prefecture

　　Renovation of a 15 ton boiler with a capacity of 9 million kcal for biomass wood chip combustion in Xiangxi Prefecture

　　Belgium, France, Germany, Italy, and others have also begun to pay attention to the research of biomass fuel compression molding technology. Currently, some biomass pellet fuel combustion equipment in Japan, the United States, and Europe has been finalized and industrialized. These technologies have been widely promoted and applied in fields such as heating, warming, drying, and power generation. Thailand, India, the Philippines, and others have also developed biomass fuel compression molding machines since the 1980s.

　　Yueyang City Biomass Particle Burner Quotation 4.8 million kcal 8-ton Boiler Renovation

　　Similar clean energy plans have also emerged in other parts of Europe. The result is that Europe has become a consumer of biomass pellets. Particles can be delivered by truck and stored directly in residential storage areas, similar to the way gasoline is delivered at a gas station. In addition to residential heating, more and more European power plants are using biomass pellets for power generation, as well as other industrial applications.

　　Zhangjiajie City Boiler Biomass Particle Burner 900000 kcal Wheat Drying

　　1. Primary air is used to transport and heat coal powder, which is sent into the furnace through a primary air duct and can supply oxygen required for the ignition and combustion of volatile components in the coal powder. It uses hot air to deliver coal powder and also has the function of preheating the coal powder. Its function is not only to maintain a certain concentration of gas powder mixture for transportation, but also to provide sufficient oxygen for the fuel during the initial combustion stage. There are two types of wind: cold wind and hot wind. Hot primary air is used to ensure that coal powder enters the boiler at a certain temperature, thereby improving energy utilization efficiency. Cold primary air is used to regulate the temperature of hot primary air to ensure the heat exchange rate effect is achieved. The coal powder carried by the primary air enters the furnace and is burned with oxygen through the secondary air.

　　The introduction of the renovation of a 15 ton boiler with a capacity of 9 million kcal for biomass wood chip combustion in Xiangxi Prefecture is as follows. For more knowledge, please feel free to leave a message for consultation. We provide free renovation plan design and budget.

AfterSalesService :

• Biomass wood chip burner