Model of biomass wood chip burner in Gulou District

Description :

　　Model of biomass wood chip burner in Gulou District

　　Model of biomass wood chip burner in Gulou District

　　Although biomass is clean and renewable, it is a low-quality hydrocarbon resource that is difficult to directly use as a modern industrial fuel. It is expected that in the future, the energy development model and project construction in the form of distributed biomass cogeneration with a relatively small installed capacity can synergistically solve the heat supply, including residential heating, for small towns and urban and rural residential areas, and achieve electricity production, consumption of biomass from surrounding agricultural and forestry areas, effectively reducing fossil fuel consumption and pollution emissions during the heating period, and reducing the negative environmental impact caused by scattered burning of agricultural and forestry biomass.

　　Biomass pellet hot air boiler combustion machine in Qingpu District, pellet wood chip combustion machine model in Gulou District

　　A biomass gasifier is a straw gasifier that involves a lower ash outlet, a cooling jacket, a water-cooled exhaust structure, a furnace body, a quick opening upper ash outlet, and a sealing cover for the feed inlet. The upper part of the straw gasifier is the furnace body, which serves as both a loading bin for straw materials to be burned and a combustion chamber. There is a feed inlet located at the center of the upper end of the furnace body, and a water sealed feed inlet sealing cover is installed on the feed inlet. The lower part of the straw gasifier is equipped with a water-cooled grate structure as the combustion grate of the gasifier. The lower furnace body below the water-cooled drainage structure is equipped with a cooling jacket with intermediate layers. The water inside the cooling jacket is connected to the water in the water-cooled drainage structure and is driven by a water pump for circulation.

　　Brand of Huai'an Biological Particle Combustion Boiler Manufacturer

　　Determine the combustion method and structural form of the boiler based on meteorological conditions, environmental protection requirements, and transportation conditions. According to the phased characteristics of biomass combustion, it is necessary to increase the boiler air volume, timely, segmented, reasonably, and effectively supplement the secondary air volume, and increase the induced draft fan air volume for the equipment added to the dust removal system to ensure the normal operation of the boiler system. Under the condition of ensuring excess air volume in the furnace and temperature in each combustion zone, the oxygen required for each stage of combustion is met, so that 70% of the volatile matter produced by biomass drying and cracking is completely burned, and fixed carbon is burned off. When designing biomass fired boilers, comprehensive consideration should be given to reducing fuel consumption and eliminating black smoke (biomass flue gas components such as unburned biomass volatiles, oxides, and unburned fuel debris) and the generation of flue gas pollutants.

　　The introduction of biomass wood chip burner models in Gulou District is as follows. For more knowledge, please feel free to leave a message for consultation. We provide free renovation plan design and budget. Model of biomass wood chip burner in Gulou District

AfterSalesService :

• Biomass wood chip burner