Vacuum adsorption vortex air pump, dual-purpose fish pond oxygenation high-pressure fan, sewage aeration high-pressure air pump

Description :

　　Vacuum adsorption vortex air pump, dual-purpose fish pond oxygenation high-pressure blower, sewage aeration high-pressure air pump

　　Industrial vortex high-pressure fanProduct Features:

　　1. High efficiency and low energy consumption (the high-pressure fan high-pressure vortex air pump has a conservative design in the high-pressure range, and can still operate safely when there are changes in usage);

　　2. Easy to install (can be installed in any horizontal or vertical direction);

　　3. High reliability (except for the impeller, the high-pressure fan has no other moving parts and is almost maintenance free);

　　4. Low vibration (the mechanical precision of high-pressure vortex fans is high, and the rotating components have undergone extremely precise balance design, testing, calibration, with very low vibration rates);

　　5. Low noise (using a low-noise motor for direct transmission, all with built-in design to reduce operating noise);

　　6. Sturdy structure (the wind surface is made of aluminum alloy and milling alloy, which is different from general aluminum or iron shell high-pressure air pumps, and is more durable and sturdy);

　　7. High environmental performance (oil-free, pollution-free, calm like water)

　　8. Scope of application (there are multiple specifications for high-pressure fans, divided into high-pressure and high air volume series, which can be flexibly selected); Principle:

　　The generation of high pressure and high suction is due to the unique design of the impeller. The impeller edge of a high-pressure fan has multiple blades. When the impeller rotates, due to centrifugal force, the air in the two blades is quickly moved towards the outer edge, transferring energy and causing the wind pressure to quickly stack, resulting in high pressure or force and an increase in speed. When the air is reintroduced into the impeller by the air duct, it will be accelerated again. Due to the multiple blades of the vacuum fan transmitting energy, the wind pressure is rapidly superimposed, forming high pressure or high suction force.

　　high-pressure blowerDetection method:

　　1. Check the fastening condition of each part and whether there is any looseness in the positioning pin

　　2. There is no oil leakage inside the blower body

　　3. There should be no scaling, rusting, or peeling inside the blower body

　　4. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of the lubricating oil, regularly listen to the operation of the blower for any noise, pay attention to whether the unit is running under non compliant working conditions, and regularly add butter

　　5. The overload of the blower is sometimes not immediately displayed, so attention should be paid to the increasing trend of the intake and exhaust pressure, bearing temperature, and motor current to determine whether the machine is running normally

　　6. Before disassembling the machine, the dimensions of each fitting should be measured, recorded, and marked on the components,

　　7. The oil tank of a new or overhauled blower should be cleaned and put into operation according to the usage steps. It is recommended to replace all lubricating oil after 8 hours of operation

　　8. A reasonable maintenance system should be formulated based on specific usage conditions, carried out on schedule, and recorded. It is recommended to conduct a major overhaul once a year and replace bearings and related vulnerable parts

　　9. It is recommended that the blower be overhauled by maintenance personnel

　　Full fan RB-71D-3 high-pressure fan 380V vortex cyclone pump industrial vacuum cleaner dedicated fan

AfterSalesService :

• high-pressure blower