High pressure fan manufacturer automatic feeding vortex air pump vacuum suction high-pressure blower equipment supporting special

Description :

　　High pressure fan manufacturer automatic feeding vortex air pump vacuum suction high-pressure blower equipment supporting special

　　Application of high-pressure fan:Welding smoke absorption dedicated blower, electroplating tank mixing dedicated high-pressure blower, textile equipment dedicated high-pressure blower, exhaust gas treatment dedicated high-pressure blower, exhaust gas collection dedicated high-pressure blower, woodworking machinery dedicated high-pressure blower, paper processing system dedicated high-pressure blower, powder conveying dedicated high-pressure blower, feeder feeding dedicated high-pressure blower, industrial dust suction waste dedicated high-pressure blower, filling machinery dedicated high-pressure blower, drying and drying dedicated high-pressure blower, paper dryer dedicated high-pressure blower, mechanical waste processing dedicated high-pressure blower, air bearing dedicated high-pressure blower, gas conveying system dedicated fan, aquaculture dedicated high-pressure blower, vacuum feeder feeding system dedicated high-pressure blower, sewage treatment dedicated high-pressure blower, shuttle free high-pressure blower High pressure fan for weaving machines Tofu machinery dedicated high-pressure fan High pressure fan specifically designed for cleaning equipment

　　8. Scope of application (there are multiple specifications for high-pressure fans, divided into high-pressure and high air volume series, which can be flexibly selected); Principle:

　　The generation of high pressure and high suction is due to the unique design of the impeller. The impeller edge of a high-pressure fan has multiple blades. When the impeller rotates, due to centrifugal force, the air in the two blades is quickly moved towards the outer edge, transferring energy and causing the wind pressure to quickly stack, resulting in high pressure or force and an increase in speed. When the air is reintroduced into the impeller by the air duct, it will be accelerated again. Due to the multiple blades of the vacuum fan transmitting energy, the wind pressure is rapidly superimposed, forming high pressure or high suction force.

　　High pressure fan manufacturer automatic feeding vortex air pump vacuum suction high-pressure blower equipment supporting specialFeatures:

　　1. High pressure, high air volume, low noise, lightweight.

　　2. Made of aluminum alloy material, significantly reducing weight and achieving the goal of lightweighting.

　　3. The motor is a fully enclosed external fan type aluminum frame motor with a special axis design, which can be used for a full length of time.

　　4. Special blade design, high pressure, large air volume, low noise, long service life.

　　5. Special air volume control damper, with high stability in air volume control and easy operation

　　6. Complete range of styles and abundant inventory!

　　high-pressure blowerDetection method:

　　1. Check the fastening condition of each part and whether there is any looseness in the positioning pin

　　2. There is no oil leakage inside the blower body

　　3. There should be no scaling, rusting, or peeling inside the blower body

　　4. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of the lubricating oil, regularly listen to the operation of the blower for any noise, pay attention to whether the unit is running under non compliant working conditions, and regularly add butter

　　5. The overload of the blower is sometimes not immediately displayed, so attention should be paid to the increasing trend of the intake and exhaust pressure, bearing temperature, and motor current to determine whether the machine is running normally

　　6. Before disassembling the machine, the dimensions of each fitting should be measured, recorded, and marked on the components,

　　7. The oil tank of a new or overhauled blower should be cleaned and put into operation according to the usage steps. It is recommended to replace all lubricating oil after 8 hours of operation

　　8. A reasonable maintenance system should be formulated based on specific usage conditions, carried out on schedule, and recorded. It is recommended to conduct a major overhaul once a year and replace bearings and related vulnerable parts

　　9. It is recommended that the blower be overhauled by maintenance personnel

　　Full fan RB-71D-3 high-pressure fan 380V vortex cyclone pump industrial vacuum cleaner dedicated fan

AfterSalesService :

• high-pressure blower