RB-71D-4 Vortex Air Pump Dual purpose Industrial Furnace Air Pump Vortex High pressure Fan Tangent Matching Fan

Description :

　　RB-71D-4 Vortex Air Pump Dual purpose Industrial Furnace Air Pump Vortex High pressure Fan Tangent Matching Fan

　　Vortex high-pressure air pumpSpecifications:

　　Power: 0.18KW 0.4KW 0.75KW 1.1KW 1.3KW 1.5KW 2.2KW 4KW 5.5KW 7.5KW 11KW 15KW 20KW 25KW

　　High temperature resistant type: 0.4KW 0.75KW 1.5KW 2.2KW 3.7KW 5.5KW 7.5KW 11KW 15KW

　　Single phase voltage: 0.2KW, 0.4KW, 0.55KW, 0.75KW, 0.85KW, 1.1KW, 1.3KW, 2.2KW

　　Wind pressure: 50mbar-1010mbar

　　Airflow: 40m3/h-3000m3/h (for the convenience of selecting different specifications, both single-stage and two-stage models are available in stock)

　　Frequency: 50HZ/60HZ Voltage: 110V-615V (universal voltage, applicable to all countries). If special voltage is required, it can be customized according to requirements

　　Pressure relief valve: RV-01 RV-02 (for use with)

　　Filter: MF08 MF10 MF12 MF16 MF20 MF32

　　Vortex air pump configuration:

　　1. Shell material: The vortex air pump adopts ultra strong die cast aluminum, which is the same aluminum material as the Mercedes Benz wheel hub. Compared with ordinary aluminum alloy, die cast aluminum is stronger and has a lighter weight effect compared to iron shell fans.

　　2. Motor performance: The vortex air pump adopts a Taiwanese motor, which is a wideband, wide voltage motor. It is included in single-phase 110V/230V industrial three-phase: 220/380/415/660V, etc. The motor frequency can be adjusted from 45-75HZ, and the IP55 protection level is F-class insulation level. Its advantage is that domestic motors cannot achieve the same level of technology, and it is highly favored by domestic and foreign customers.

　　3. Fan oil seal: The vortex air pump adopts German MERKEL oil seal, and the German MERKEL material uses fluororubber that can withstand temperatures from -25 ℃ to 300 ℃. Compared to the general oil seal, its lip temperature is 20-50 ℃ higher than the working medium temperature during operation, making it more stable in performance, maintenance free, and has a longer lifespan.

　　4. Fan bearings: The core components of the vortex air pump use German SKF and Japanese NSK brand bearings, which can withstand up to 350 degrees Celsius and 4000 revolutions per minute. For domestically produced Luo axis, human centered bearings have stable performance, low noise, maintenance free, longer service life, and can ensure longer operation of the fan.

　　high-pressure blowerDetection method:

　　1. Check the fastening condition of each part and whether there is any looseness in the positioning pin

　　2. There is no oil leakage inside the blower body

　　3. There should be no scaling, rusting, or peeling inside the blower body

　　4. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of the lubricating oil, regularly listen to the operation of the blower for any noise, pay attention to whether the unit is running under non compliant working conditions, and regularly add butter

　　5. The overload of the blower is sometimes not immediately displayed, so attention should be paid to the increasing trend of the intake and exhaust pressure, bearing temperature, and motor current to determine whether the machine is running normally

　　6. Before disassembling the machine, the dimensions of each fitting should be measured, recorded, and marked on the components,

　　7. The oil tank of a new or overhauled blower should be cleaned and put into operation according to the usage steps. It is recommended to replace all lubricating oil after 8 hours of operation

　　8. A reasonable maintenance system should be formulated based on specific usage conditions, carried out on schedule, and recorded. It is recommended to conduct a major overhaul once a year and replace bearings and related vulnerable parts

　　9. It is recommended that the blower be overhauled by maintenance personnel

　　RB-71D-4 Vortex Air Pump Dual purpose Industrial Furnace Air Pump Vortex High pressure Fan Tangent Matching Fan

AfterSalesService :

• Vortex high-pressure fan