Full Wind RB-81D-2 Negative Pressure Suction Pump Vacuum Suction Machine Special High Pressure Vortex Fan Vortex Cyclone Pump

Description :

　　Full Wind RB-81D-2 Negative Pressure Suction Pump Vacuum Suction Machine Special High Pressure Vortex Fan Vortex Cyclone Pump

　　The casting process of the 4kw high-pressure vortex blower for the all wind high-pressure vortex air pump. Our vortex air pump is made by one-time die-casting, with an exquisite appearance. Combined with car paint, it is comparable to imported fans. But we have met your quality requirements with a faster supply speed and more comprehensive after-sales service, at one-third the price of imported fans. Undoubtedly, our cost-effectiveness is higher than theirs.

　　high-pressure blowerDetection method:

　　1. Check the fastening condition of each part and whether there is any looseness in the positioning pin

　　2. There is no oil leakage inside the blower body

　　3. There should be no scaling, rusting, or peeling inside the blower body

　　4. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of the lubricating oil, regularly listen to the operation of the blower for any noise, pay attention to whether the unit is running under non compliant working conditions, and regularly add butter

　　5. The overload of the blower is sometimes not immediately displayed, so attention should be paid to the increasing trend of the intake and exhaust pressure, bearing temperature, and motor current to determine whether the machine is running normally

　　6. Before disassembling the machine, the dimensions of each fitting should be measured, recorded, and marked on the components,

　　7. The oil tank of a new or overhauled blower should be cleaned and put into operation according to the usage steps. It is recommended to replace all lubricating oil after 8 hours of operation

　　8. A reasonable maintenance system should be formulated based on specific usage conditions, carried out on schedule, and recorded. It is recommended to conduct a major overhaul once a year and replace bearings and related vulnerable parts

　　9. It is recommended that the blower be overhauled by maintenance personnel

　　Full Wind RB-81D-2 Negative Pressure Suction Pump Vacuum Suction Machine Special High Pressure Vortex Fan Vortex Cyclone Pump

AfterSalesService :

• High pressure vortex fan