0.85KW Vortex Air Pump RB-41D-2 Low Power Vortex Cyclone Vacuum Cleaner Dedicated Vacuum Fan

Description :

　　0.85KW Vortex Air Pump RB-41D-2 Low Power Vortex Cyclone Vacuum Cleaner Dedicated Vacuum Fan

　　A high-pressure blower can not only suck air but also blow air, achieving a dual-use effect and being economical and worry free.

　　Secondly, the vortex air pump is very environmentally friendly, using high-speed NSK and SKF high-quality bearings to achieve high efficiency and performance, and operates almost oil-free during use.

　　Thirdly, the fan is equipped with a high-performance motor with wide bandwidth and pressure to achieve stable operation, better achieving high fan pressure, strong wind power, and high efficiency.

　　Fourthly, high-end sound-absorbing cotton is installed at the inlet and outlet of the vortex fan to reduce the wind noise generated by the fan, achieving low noise and not causing inconvenience to surrounding residents.

　　Fifth, high-pressure fans are very durable, easy to maintain, and almost maintenance free.

　　Sixth, the mechanical wear of the vortex blower itself during operation is minimal, and its service life is at least three years.

　　Made of special materials:

　　1、 The wind blades and covers are made of the world's hardest ADC12 material, equivalent to the same material as Mercedes Benz wheel rims.

　　2、 The bearing adopts high-speed and high-temperature resistant imported bearings, with 2800 revolutions per minute at 50Hz and 3450 revolutions per minute at 60Hz, without lubrication and maintenance. Supports 24-hour long-term operation, with stable and reliable performance.

　　3、 The air inlet and outlet are equipped with built-in soundproof pipes to achieve low noise.

　　4、 Models below 1.1KW can be used at full voltage.

　　5、 Stable pressure, demonstrated through examples of water treatment and electroplating treatment, with even stirring and water wave rolling height *.

　　6、 Under the same power and pressure, the flow rate is greater than that of similar products.

　　7、 The wind cover adopts a sheet-like heat dissipation design, which is equivalent to a motorcycle engine heat dissipation device, greatly reducing the temperature during fan operation.

　　8、 The all wind high-pressure fan adopts the principle of bearing pre design, with two bearings placed at the front end of the fan blades and the rear end of the motor, achieving dynamic balance configuration and facilitating heat dissipation.

　　(The reason is that there are heat dissipation fins at the front end of the fan blades for heat dissipation, while the bearings at the back end work under the built-in cooling fan of the fan, thus keeping the bearings working for a long time at low temperatures.)

　　9、 Adopting a special shock-absorbing foot base design greatly reduces the vibration generated during the operation of the fan.

　　10、 Economic and energy-saving. At the same power, pressure, and flow rate, the current of a full wind high-pressure fan is lower than that of other similar products.

　　0.85KW Vortex Air Pump RB-41D-2 Low Power Vortex Cyclone Vacuum Cleaner Dedicated Vacuum Fan

AfterSalesService :

• 0.85KW vortex air pump