Printing drying fan, printing adsorption vortex fan, industrial adsorption blower, vacuum adsorption vortex pump

Description :

　　Printing drying fan, printing adsorption vortex fan, industrial adsorption blower, vacuum adsorption vortex pump

　　The casting process of the 4kw high-pressure vortex blower for the all wind high-pressure vortex air pump. Our vortex air pump is made by one-time die-casting, with an exquisite appearance. Combined with car paint, it is comparable to imported fans. But we have met your quality requirements with a faster supply speed and more comprehensive after-sales service, at one-third the price of imported fans. Undoubtedly, our cost-effectiveness is higher than theirs.

　　It has dual functions of blowing and suction, and can be used for both suction and blowing; For example, the Gaorui vortex air pump can also use both suction and blowing at the same time, which is equivalent to the function of an air ring vacuum pump. The impeller is composed of dozens of blades, similar to a large gas turbine impeller. When the impeller of the vortex air pump rotates, the air in the middle of the impeller blades is subjected to centrifugal force and moves towards the edge of the impeller. There, the air enters the annular cavity of the pump body and then returns to the impeller. In many industries such as food industry, printing industry, textile industry, mechanical processing, postal and telecommunications, dry cleaning clothes, clothing processing, medical and health, it is precisely because of high-pressure fans that their efficiency is higher and their profits are greater. They circulate in the same way from the starting point of the blades, because the air is uniformly accelerated. The circulating airflow generated by the rotation of the impeller causes the air to spiral out, During the operation of the high-pressure vortex fan, its air volume can be controlled to increase its stability and make operation easier. The device has a beautiful appearance, which makes maintenance work easier in the later stage, so air leaves the pump body with extremely high energy for use.

　　high-pressure blowerDetection method:

　　1. Check the fastening condition of each part and whether there is any looseness in the positioning pin

　　2. There is no oil leakage inside the blower body

　　3. There should be no scaling, rusting, or peeling inside the blower body

　　4. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of the lubricating oil, regularly listen to the operation of the blower for any noise, pay attention to whether the unit is running under non compliant working conditions, and regularly add butter

　　5. The overload of the blower is sometimes not immediately displayed, so attention should be paid to the increasing trend of the intake and exhaust pressure, bearing temperature, and motor current to determine whether the machine is running normally

　　6. Before disassembling the machine, the dimensions of each fitting should be measured, recorded, and marked on the components,

　　7. The oil tank of a new or overhauled blower should be cleaned and put into operation according to the usage steps. It is recommended to replace all lubricating oil after 8 hours of operation

　　8. A reasonable maintenance system should be formulated based on specific usage conditions, carried out on schedule, and recorded. It is recommended to conduct a major overhaul once a year and replace bearings and related vulnerable parts

　　9. It is recommended that the blower be overhauled by maintenance personnel

　　Printing drying fan, printing adsorption vortex fan, industrial adsorption blower, vacuum adsorption vortex pump

AfterSalesService :

• Industrial adsorption blower