4KW vortex high-pressure air pump, all wind vortex air pump, vortex vacuum suction fan, vacuum packaging vortex air pump

Description :

　　4KW vortex high-pressure air pump, all wind vortex air pump, vortex vacuum suction fan, vacuum packaging vortex air pump

　　High pressure blower, also known as vortex air pump, annular blower, side flow fan, vortex fan, is a dual-purpose blower for blowing and suction, medium pressure fan, through type blower, centrifugal fan, explosion-proof blower. The company introduces foreign technology and uses Siemens technology from Germany to produce it. NSK/SKF imported bearings are used, which have superior rigidity and are more suitable for long-term non-stop operation, allowing us to have a larger air volume and higher air pressure.

　　1Easy to install

　　Double bladed vortex air pump Double stage vortex air pump Double stage vortex air pumpCan be installed at any time in the place of use for compressed air or for evacuation. And it can be installed in any horizontal or vertical direction.

　　2sturdy structure

　　Double bladed vortex air pump Double stage vortex air pump Double stage vortex air pumpThe body is made of ADC12 aluminum alloy casting, which is different from general iron shell or AC10 aluminum alloy blowers. ADC12 material is the same as Mercedes Benz car wheel drums, making it more sturdy and durable.

　　3high reliability

　　Double bladed vortex air pump Double stage vortex air pump Double stage vortex air pumpThere are no other moving parts, and the impeller is directly connected to the motor without gears or transmission belts, so it has high reliability, almost maintenance free, oil-free, and pollution-free. When the impeller rotates, it does not come into contact with anything and is lubrication free, ensuring 100% oil-free.

　　4Low vibration

　　Double bladed vortex air pump Double stage vortex air pump Double stage vortex air pumpThe parts are processed and tested using imported equipment, and the operating parts have undergone extremely precise balancing design, testing, and calibration, resulting in low vibration rates.

　　Common faults and troubleshooting methods

　　（1） The fan does not rotate

　　1. Not connected to power supply - connected to power supply

　　2. Motor not working - check motor wiring or replace motor

　　3. Damaged fan head - repair or replace the fan

　　4. Foreign objects stuck in the fan - remove foreign objects

　　（2） Increased noise

　　1. Bearing dry lubrication - adding bearing grease

　　2. Bearing damage - replace the bearing

　　3. Impeller wear - replace impeller or pump head

　　4. Loose or detached sturdy components - tighten the fasteners tightly

　　5. There are foreign objects inside the fan - remove the foreign objects or replace the pump head

　　（3） Increased vibration

　　1. Bearing damage - replace the bearing

　　2. Unbalanced impeller - remove foreign objects from the impeller or calibrate the dynamic and static balance

　　3. Spindle deformation - replace spindle or pump head

　　4. Entering the turbulent zone in the working state - adjust the working state to avoid the turbulent zone

　　5. The inlet and outlet filter screens are blocked - clean the filter screen

　　（4） Temperature increase

　　1. Inlet temperature too high - reduce inlet temperature

　　2. Bearing dry lubrication - adding bearing grease

　　3. Fan efficiency decreases - remove blade dust or replace pump head

　　4. Change in work status - adjust work status

　　5. Environmental temperature increase - increase ventilation and heat dissipation in the environment

　　（5） Reduced pressure

　　1. Pump head speed reduction - low power supply voltage or motor failure

　　2. Increased pipeline resistance - reducing pipeline resistance

　　3. Change in work status - adjust work status

　　4. Motor direction reversed - motor rewiring

　　（6） Decreased traffic

　　1. The inlet and outlet air filters are clogged - clean the filter

　　2. Pump head speed reduction - low power supply voltage or motor failure

　　3. Increased pipeline resistance - reducing pipeline resistance

　　4. Increase in work status - adjust work status

　　5. Motor direction reversed - motor reconnected

　　4KW vortex high-pressure air pump, all wind vortex air pump, vortex vacuum suction fan, vacuum packaging vortex air pump

AfterSalesService :

• vacuum fan