Vortex fan, vortex air pump, vortex fan, industrial blower, fish pond aerator, high-pressure fan, booster pump

Description :

　　Vortex fan, vortex air pump, vortex fan, industrial blower, fish pond aerator, high-pressure fan, booster pump

　　high-pressure blowerThere are three main types of annular high-pressure blowers, including single impeller, double impeller, and triple impeller. Each of these three types has its own characteristics and can be considered as three types of annular high-pressure blowers with the same power. Their corresponding parameters are also different, so the cost prices of the three types are also different. Generally speaking, under the same power, the unit price of single impeller is the lowest, followed by double impeller, and finally triple impeller. Because adding one impeller also means thickening the fan casing, the cost is also high!

　　Parameter selection:

　　The main parameters for selecting a vortex high-pressure fan include power, air volume and pressure (which require certain requirements for calculation), voltage, etc.

　　Due to the widespread use of vortex air pumps, their selection method is the same as that of high-pressure fans. Generally speaking, the following two steps need to be followed:

　　1. Need to determine what function of the high-pressure fan is used on site, whether it is suction or blowing, and find the corresponding pressure flow curve of the high-pressure fan; If the curve is misread, sometimes the selected product cannot be used;

　　2. Based on the calculated pressure and flow rate, find the working curve above the corresponding working point that satisfies both pressure and flow rates on the curve graph; Then select the high-pressure fan model based on the working curve;

　　As long as it is a different work site, its requirements for pressure and flow rate are different, so in order to obtain relatively accurate data, relevant calculations need to be carried out. This needs to be done by designers or consulted with companies.

　　 This product has passed the European CE certification and CCC certification, and does not require any modifications. After testing, it can be used in Europe, America, Asia, and other regions!

　　High pressure fan, high-pressure blower, vacuum vortex air pump specifications:

　　Power: 0.18 KW 0.2KW 0.4KW 0.55KW 0.75KW 0.85KW 1.1KW 1.3KW 1.5KW 1.6KW 2.2KW 3.8KW 4KW 5.5KW 7.5KW 8.5KW 9KW

　　11KW 12.5KW 13KW 15KW 16.5KW 18.5KW 20KW 25KW 30KW

　　High temperature resistant type: 0.4KW 0.75KW 1.5KW 2.2KW 3.7KW 4KW 5.5KW 7.5KW 11KW 15KW 18.5KW

　　Single phase voltage: 0.12KW 0.18KW 0.2KW 0.4KW 0.55KW 0.75KW 0.85KW 1.1KW 1.3KW 1.5KW 1.6KW 2.2KW

　　Wind pressure: 50mbar-1040mbar (positive pressure: 8KPA-104KPA) (negative pressure: 8KPA-73KPA) (For the convenience of selecting different specifications, single-stage/two-stage models are available in stock)

　　Airflow: 40m3/h-3000m3/h (for the convenience of selecting different specifications, both single-stage and two-stage models are available in stock)

　　Frequency: 50HZ/60HZ

　　Voltage: 110V-200V-220V-280V-380V-400V-415V-440V-600-615V (universal voltage, applicable to all countries). If special voltage is required, it can be customized according to requirements

　　Pressure relief valve: RV-01 RV-02 (for use with)

　　Filter: MF08 MF10 MF12 MF16 MF20 MF32

　　Performance characteristics:

　　1. Easy to install

　　The full air high-pressure blower can be installed at any time in the place of use to supply compressed air or for evacuation. And it can be installed in any horizontal or vertical direction.

　　2. Sturdy structure

　　The body of the all wind high-pressure blower is made of ADC12 aluminum alloy casting, which is different from general iron shell or AC10 aluminum alloy blowers. ADC12 material is the same as the wheel drum of Mercedes Benz cars, making it more sturdy and durable.

　　3. High reliability

　　Apart from the impeller, the all wind high-pressure fan has no other moving parts, and the impeller is directly connected to the motor without gears or transmission belts, making it highly reliable and almost maintenance free.

　　No oil and gas, no pollution. When the impeller rotates, it does not come into contact with anything and is free of lubrication, ensuring 100% oil and gas free operation.

　　4. Low vibration

　　The components of the all wind high-pressure blower are processed and tested using imported equipment from Germany and Japan. The operating parts have undergone extremely precise balancing design, testing, and calibration, resulting in a very low vibration rate.

　　5. Low noise

　　The all wind high-pressure fan is directly driven by a high-pressure low-noise motor, and there are built-in mufflers at both the inlet and outlet to reduce noise during operation.

　　Vortex fan, vortex air pump, vortex fan, industrial blower, fish pond aerator, high-pressure fan, booster pump

AfterSalesService :

• Vortex air pump