Full wind 3kw high-pressure vortex fan, industrial high-pressure fan, aeration and oxygenation blowing and suction dual-purpose high-pressure blower

Description :

　　Full wind 3kw high-pressure vortex fan, industrial high-pressure fan, aeration and oxygenation blowing and suction dual-purpose high-pressure blower

　　Vacuum adsorption vortex air pumpFeatures:

　　1. It has dual functions of blowing and suction, and can be used for both suction and blowing;

　　2. Running with little or no oil, the output air is clean;

　　3. Compared to centrifugal fans and medium pressure fans, their pressure is much higher, often more than ten times that of centrifugal fans;

　　4. If the pump body is die cast as a whole and shockproof mounting feet are used, the requirements for the installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles;

　　5. Compared to similar fans, its operating noise is lower, just like our company's introduction of ultra quiet vortex fans:

　　6. Maintenance free use; Its consumable parts are only two bearings, which basically do not require maintenance within the warranty period;

　　7. The mechanical wear of the vortex blower is very small because there are no other mechanical contact parts besides the bearings, so the service life is naturally very long. As long as it is under normal operating conditions, there is no problem for 3-5 years;

　　8. Easy to install and use!

　　9. The overall material is made of aluminum alloy, and the motor is an explosion-proof motor, which will never produce sparks due to friction. It is more reassuring to use and has better explosion-proof performance.

　　Introduction to Application Cases of High Pressure Fans

　　1. The fully ventilated vortex air pump swimming pool equipment mainly uses high-pressure fans, which inject air into the bathtub

　　A bathtub equipped with a high-pressure fan will not suck in cold air like other bathtubs during use, causing the pool water to cool down and failing to achieve a complete hydrotherapy effect. The cold air drawn in by the high-pressure fan is compressed into hot air through the air drum. The bathtub achieves a hydrotherapy effect by blowing hot air into the water, and the flowing hot water can relax muscles and help release the body's natural painkiller - endorphins. In addition to maintaining the heat of the water, the intensity and location of air injection into the water are another major factor determining the fruit, which is determined by the model of the high-pressure fan.

　　2. Application of Full Wind Vortex Air Pump in Textile Machinery

　　Using the negative pressure of a high-pressure fan to separate the products produced by the weaving machine from moisture is a common dehydration method in textile machinery. When selecting, a waterproof and elongated high-pressure fan with a power of 0.4KW is generally used. In addition, this product can also absorb other impurities generated in the spinning process, improving the quality and work efficiency of the product.

　　3. Application of Full Wind Vortex Air Pump in PCB Industry

　　One manifestation is the drying of electronic circuit boards, using high-pressure fans to blow away tiny dust and water droplets on the circuit boards, which is fast, clean, and effective.

　　Secondly, stir the electrolytic cell with the gas blown out by a high-pressure fan to circulate the electrolyte and drive away the attached water bubbles, resulting in rapid and uniform electroplating.

　　4. Application of all wind vortex air pump in industrial vacuum cleaners

　　Industrial vacuum cleaners use high-pressure fan impellers to operate at high speeds, generating strong suction and pressure to create a local vacuum inside the dust collection chamber.

　　Under the action of suction and pressure, air is discharged at high speed, and the air in the suction part at the front end of the high-pressure fan continuously replenishes the air in the fan, causing an instantaneous vacuum inside the vacuum cleaner, forming a negative pressure brush, long connecting pipe, bent pipe, hose, hose joint with the external atmospheric pressure into the dust filter bag. Dust and other debris are trapped in the dust filter bag, and the air is purified by the filter and discharged from the rear of the machine.

　　High pressure fans in industrial vacuum cleaners use suction to create a vacuum effect, creating convection in the air and collecting dust and other debris through pipes

　　5. Dedicated all air vortex air pump for filling equipment

　　Before filling: The high-pressure fan sucks away the moisture on the inner wall of the container that needs to be filled, and at the same time, a relative vacuum is formed inside the container for easy filling

　　After filling: drying of labeled bottles The machine is also composed of a high-pressure fan and needs to be installed on the bottle conveying line for use. The bottles are first blown away by the high-pressure fan and dried synchronously to improve efficiency. No need to install air flow heater equipment.

　　6. Full air vortex air pump for packaging machinery

　　In the packaging machinery industry, the suction function of high-pressure fans is mainly utilized. In the engineering of packaging products, the vacuum adsorption technology of high-pressure fans is used to fix products and assist in transportation. The case is in the egg packaging industry.

　　7. Leather Machinery Dedicated Full Wind Vortex Air Pump

　　A specialized equipment used for coating the grain surface of leather during the finishing process in leather manufacturing. Controlled by computer and pneumatic to operate the spray gun. Realize the process requirements of spraying with skin and stopping without skin under the rotary spray gun. And the sprayed leather is automatically sent to the drying room for drying treatment. After drying, the leather is cooled by cold air to complete the entire processing process.

　　Application of high-pressure fan: The high-pressure fan forms a purification device, and the formed water curtain filter layer can take away residual dust particles in the air, so the discharged gas is clean. The exhaust volume of this machine matches the exhaust volume inside the spray chamber. Even if the glass door of the spray chamber is not closed during operation, dust and mist will not spread outward, making it an environmentally friendly product. In addition, in the leather cutting system, the vacuum generated by the high-pressure fan is used to firmly fix the leather material on the cutting table, improving work efficiency.

　　8. Dedicated all air vortex air pump for tunnel engineering

　　Tunnels, mines, and narrow construction sites generate dust and toxic gases. High pressure blowers use vacuum suction to remove harmful and explosive gas dust to reduce engineering accidents.

　　9. High pressure fan dedicated to the central feeding system

　　The central feeding system adopts high-pressure fan vacuum conveying method, which transports plastic raw materials from storage tanks to the central drying system through a centralized pipeline system, and then transports the dried raw materials to each injection molding machine. The central conveying system adopts a design of "one machine, one pipe" to ensure stable operation of the entire system and no occurrence of material blockage. It is used in conjunction with a central drying system and can transport raw materials using dry air to prevent moisture regain after drying. At the same time, after each conveying cycle, the conveying pipeline will be cleaned to ensure that there are no residual particles in the pipeline. This not only avoids the moisture regain of the raw materials, but also ensures the consistency of the performance of the raw materials added to the injection molding machine. Under the vacuum negative pressure of the high-pressure fan, the original dust in the raw materials will be filtered out through the dust filtration system, which helps to improve the quality of the formed products.

　　10. Full air vortex air pump for sewage treatment

　　Aeration method: When the microporous aeration plate is used for aeration, the membrane will bulge and expand its micropores, and aeration will begin accordingly. When aeration stops, the micropores shrink and the film is tightly stretched on the substrate to prevent sewage from entering the interior, causing blockage of the pores. Therefore, there is no need for the 1m high-performance air filter required by the previous microporous aeration head.

　　Full wind 3kw high-pressure vortex fan, industrial high-pressure fan, aeration and oxygenation blowing and suction dual-purpose high-pressure blower

AfterSalesService :

• Dual purpose high-pressure blower for blowing and suction