RB-51D-2 Duobao Fish Farming Oxygenation Blower Underwater Oxygenation Aeration High Pressure Fan

Description :

RB-51D-2 Duobao Fish Farming Oxygenation Blower Underwater Oxygenation Aeration High Pressure Fan

Shrimp pond and crab pond aerator fan: one of the essential equipment for low-noise, stable operation, and long service life, suitable for high-yield and high-efficiency aquaculture; Reasonable use of aerators can not only prevent and reduce floating heads, but also improve water quality, strengthen pond water circulation, promote plankton reproduction. It is an important measure for scientific fish farming, increasing breeding density, improving unit area yield of aquaculture, and thereby enhancing the economic benefits of aquaculture. It has been widely promoted and applied by aquaculture farmers and breeding bases. The use of an aerator blower should be determined according to the size, depth, and density of the fish pond.

Vortex air pumpInstallation instructions:

1. The high-pressure fan should be placed in a relatively stable place, and the surrounding environment should be clean, dry, and well ventilated.

2. The rotation direction of the high-pressure fan impeller must be in the direction indicated by the arrow on the fan casing.

3. When the high-pressure vortex fan is working, the working pressure should not exceed 8kPa to avoid excessive heat generated by the fan and damage to the air pump caused by motor overcurrent.

4. The filter screens and noise reduction devices at both ends of the high-pressure fan inlet and outlet should be cleaned in a timely manner according to the situation to avoid blockage and affect the use of the explosion-proof high-pressure fan.

5. The external connection of the inlet and outlet of the high-pressure fan must be made using flexible hoses (such as rubber hoses, plastic spring hoses).

6. Replacement of bearings for high-pressure fans: The replacement of bearings must be carried out by personnel familiar with repair work. First loosen the screws on the pump cover, and then disassemble the parts one by one according to the order shown in the diagram. The disassembled parts should be cleaned, and then assembled in reverse order. When disassembling, do not forcefully pry the impeller. Use a dedicated roller to remove it, and do not miss the adjusting gasket to avoid affecting the clearance that has been adjusted before leaving the factory.

RB-51D-2 Duobao Fish Farming Oxygenation Blower Underwater Oxygenation Aeration High Pressure Fan

AfterSalesService :

• Underwater oxygenation and aeration high-pressure fan