RB-41D-A1 full air high-pressure vortex air pump vacuum packaging suction fan

Description :

RB-41D-A1 full air high-pressure vortex air pump vacuum packaging suction fan

Vortex air pumpApplication:

1. Air suction function: screen printing machine suction, welding exhaust gas suction, weaving machine silk suction, photographic plate making, powder conveying, printing adsorption, industrial vacuum suction, vacuum dehydration, book making machine, residual cloth treatment, milk carton filling machine, tofu machinery, processing material retention, construction site, ironing machine, gas decomposition.

2. Hair blowing function: gas and heavy oil spraying, bottle washing machine drying, paper and cloth strip blowing, air knife for drying, cutting machine air cushion, livestock manure fermentation explosion gas, electrolyte stirring, oxygen supply for breeding ponds, convenient punching machine for taking formed products, powder conveying, incinerator waste disposal, smoke blowing and suction, car washing and drying, forced drying for printing machines, and blowing and drying after washing.

Vortex air pumpFeatures:

1. It has dual functions of blowing and suction, and can be used for both suction and blowing;

2. Running with little or no oil, the output air is clean;

3. Compared to centrifugal fans and medium pressure fans, their pressure is much higher, often more than ten times that of centrifugal fans;

4. If the pump body is die cast as a whole and shockproof mounting feet are used, the requirements for the installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles;

5. Compared to similar fans, its operating noise is lower, just like our company's introduction of ultra quiet vortex fans:

6. Maintenance free use; Its consumable parts are only two bearings, which basically do not require maintenance within the warranty period;

7. The mechanical wear of the vortex blower is very small because there are no other mechanical contact parts besides the bearings, so the service life is naturally very long. As long as it is under normal operating conditions, there is no problem for 3-5 years;

8. Easy to install and use!

9. The overall material is made of aluminum alloy, and the motor is an explosion-proof motor, which will never produce sparks due to friction. It is more reassuring to use and has better explosion-proof performance.

Made of special materials:

1、 The wind blades and covers are made of the world's hardest ADC12 material, equivalent to the same material as Mercedes Benz wheel rims.

2、 The bearing adopts high-speed and high-temperature resistant imported bearings, with 2800 revolutions per minute at 50Hz and 3450 revolutions per minute at 60Hz, without lubrication and maintenance. Supports 24-hour long-term operation, with stable and reliable performance.

3、 The air inlet and outlet are equipped with built-in soundproof pipes to achieve low noise.

4、 Models below 1.1KW can be used at full voltage.

5、 Stable pressure, demonstrated through examples of water treatment and electroplating treatment, with even stirring and water wave rolling height *.

6、 Under the same power and pressure, the flow rate is greater than that of similar products.

7、 The wind cover adopts a sheet-like heat dissipation design, which is equivalent to a motorcycle engine heat dissipation device, greatly reducing the temperature during fan operation.

8、 The all wind high-pressure fan adopts the principle of bearing pre design, with two bearings placed at the front end of the fan blades and the rear end of the motor, achieving dynamic balance configuration and facilitating heat dissipation.

(The reason is that there are heat dissipation fins at the front end of the fan blades for heat dissipation, while the bearings at the back end work under the built-in cooling fan of the fan, thus keeping the bearings working for a long time at low temperatures.)

9、 Adopting a special shock-absorbing foot base design greatly reduces the vibration generated during the operation of the fan.

10、 Economic and energy-saving. At the same power, pressure, and flow rate, the current of a full wind high-pressure fan is lower than that of other similar products.

RB-41D-A1 full air high-pressure vortex air pump vacuum packaging suction fan

AfterSalesService :

• Vacuum packaging suction fan