Double turbo 5.5KW soybean product equipment suction soybean high-pressure fan RB-72S-4

Description :

Double turbo 5.5KW soybean product equipment suction soybean high-pressure fan RB-72S-4

Double stage high-pressure fan That's what we usually sayDouble bladed high-pressure fanBecause the product consists of two impellers, it has a higher flow rate and pressure compared to a single-stage high-pressure fan.

The two-stage high-pressure fan is a vortex air pump that can be used for both blowing and suctionThe special blade design of high-pressure fans has the characteristics of high pressure, large air volume, low noise, and high temperature resistance. The high-voltage fan has strong insulation performance, easy installation, high stability, and the gas passing through is oil-free and dry. The exhaust standard can reach the highest GAO quality. The generation of high pressure and high suction is due to the unique design of the impeller. The impeller edge of a two-stage high-pressure fan has multiple blades. When the impeller rotates, due to centrifugal effect, the air in the two blades is quickly moved towards the outer edge direction, converted into energy, and the wind pressure is quickly superimposed, forming high pressure or increasing the movement speed. When the air is reintroduced into the impeller by the air duct, it will be accelerated again. Due to the multiple blades of the high-pressure fan transmitting energy, the wind pressure is rapidly overlapped, resulting in high pressure or high suction force.

Vortex air pumppower

0.2KW、0.25KW、0.37KW、0.4KW、0.55KW、0.75KW、0.85KW、1.1KW、1.3KW、1.5KW、1.6KW、2.2KW、3KW、4KW、5.5KW、7.5KW、8.5KW、11KW、12.5KW、15KW、18.5KW、20KW、25KW。

Vortex air pumpworking principle

When the impeller rotates, due to the centrifugal force, the wind vane drives the gas to move forward and outward, forming a series of spiral movements. The air between the impeller blades accelerates and rotates in a spiral shape, squeezing the gas outside the pump body into the side groove (sucked in through the suction port). When it enters the side channel, the gas is compressed and then returns to accelerate and rotate between the impeller blades again. When air passes through the impeller and side groove along a spiral trajectory, each impeller blade increases the degree of compression and acceleration. As the rotation progresses, the kinetic energy of the gas increases, further increasing the pressure of the gas passing through the side channel.

Vortex air pumpstructure

1. Impeller: Adopting a gradually opening linear surface for high volume utilization. 2. Bearing: 3000 type double row radial spherical roller bearings are selected as the positioning end near the coupling end. 32000 type single row radial short cylindrical roller bearings are selected as the free end near the gear end to adapt to the axial displacement of the rotor during thermal expansion. 3. Body: Composed of a casing and left and right wall panels. The left and right wall panels, as well as the bearing seats and sealing parts installed inside the left and right wall panels, can be interchangeable. 4. Base: Both small and medium-sized fans are equipped with a common base, while large fans are only equipped with a fan base for easy installation and debugging. 5. Transmission mode: mainly through direct coupling of couplings. If performance specifications require it, the method of variable speed with triangular pulleys can also be chosen. Elastic couplings are selected for the coupling, which can alleviate impact and compensate for a small amount of axis deviation. Large flow fans can also be driven by steam turbines or other types of motors, in addition to electric motors.

Tofu processing machinery equipment High pressure fanPerformance Characteristics

　　Lightweight design, compact structure

　　-Single level, double level, three level, four level, five level, IP54 protection level 2 motor, insulation level F, bearing equipped with Japanese NSK bearings. compact structure

　　-Aluminum alloy casting, lightweight, exquisite craftsmanship, and beautiful appearance.

　　Wide performance range

　　-Flow rate reaches 56m3/min

　　-Vacuum up to 100kpa

　　-Pressure reaches 74kpa

　　high reliability

　　-Casting aluminum alloy impeller and high-strength shell

　　-The structure is simple, with only 5 main components - base, housing, impeller, bearings, and motor

　　-Sealed bearings to prevent damage from pollutants

　　-Only one annular chamber unit to prevent thermal stress damage

　　-Double Chen type elastic shaft seal reduces leakage

　　-Adequate impeller support to prevent blade breakage and blower damage

　　-Single side sealing gap to reduce malfunctions during high-temperature operation of the blower

　　Oil free transportation

　　-No hydrocarbons carried out, no oil and gas supply air

　　-Meet hygiene and scientific application requirements

　　Low noise and low temperature rise

　　-Single vortex single-sided suction impeller design, with lower noise and lower temperature rise compared to the "paddle wheel" design

　　-The special circular chamber design maintains a stable laminar airflow with low airflow noise

　　-Aluminum alloy shell with good heat dissipation performance

Double turbo 5.5KW soybean product equipment suction soybean high-pressure fan RB-72S-4

AfterSalesService :

• Bean product equipment suction soybean high-pressure fan