Chicken manure fermentation aeration high-pressure fan biological oxygenation fermentation aeration vortex fan high-pressure vortex air pump

Description :

Chicken manure fermentation aeration high-pressure fan biological oxygenation fermentation aeration vortex fan high-pressure vortex air pump

　　1、 Definition of vortex fan

　　A vortex fan pump is an air pump that generates power based on the principle of centrifugal force, also known as a high-pressure blower or vortex air pump; It is commonly referred to as an air ring fan or a side flow fan in foreign countries.

　　2、 Working principle of vortex fan

　　After the power is turned on, the fan rotates. Due to the groove design of the impeller, it will drive air flow. Therefore, air enters the pump body through the inlet, and the air is stirred inside. Each groove is pressurized in a vortex like manner, circulating one after another, ultimately forming a strong airflow energy, which is discharged from the pump body through the outlet for use.

　　3、 Classification of vortex fans

　　Vortex fans can be divided into single impeller, double impeller, and three impeller fans. As the name suggests, it is defined by the number of built-in impellers. At the same power:

　　Pressure: single blade

　　Flow rate: single blade

　　Weight and volume: single blade

　　Price: Single blade

　　4、 Advantages of vortex fan

　　1. Dual function of blowing and suction, one machine can be used for vacuum adsorption, blowing and conveying, as well as closed circuit air circulation, etc.

　　2. Oil free operation, the output air is clean, because the fan relies on the input of electricity to operate, and there are no oily components inside, so there is no need to worry about air pollution during transportation, and no impurities will be produced.

　　3. High pressure and power, compared to centrifugal fans and medium pressure fans, its pressure is much higher, which determines the pressure problem that other fans cannot meet. Moreover, it has a small size, low sound, and will not cause noise pollution.

　　4. The pump body is integrally cast using a hydraulic press and equipped with shockproof mounting feet. Therefore, its requirements for the installation foundation are also very low, and it can even operate normally without fixing the feet.

This product has passed the European CE certification and CCC certification, and does not require any modifications. After testing, it can be used in Europe, America, Asia, and other regions!

High pressure fan, high-pressure blower, vacuum vortex air pump specifications:

Power: 0.18 KW 0.2KW 0.4KW 0.55KW 0.75KW 0.85KW 1.1KW 1.3KW 1.5KW 1.6KW 2.2KW 3.8KW 4KW 5.5KW 7.5KW 8.5KW 9KW

11KW 12.5KW 13KW 15KW 16.5KW 18.5KW 20KW 25KW 30KW

High temperature resistant type: 0.4KW 0.75KW 1.5KW 2.2KW 3.7KW 4KW 5.5KW 7.5KW 11KW 15KW 18.5KW

Single phase voltage: 0.12KW 0.18KW 0.2KW 0.4KW 0.55KW 0.75KW 0.85KW 1.1KW 1.3KW 1.5KW 1.6KW 2.2KW

Wind pressure: 50mbar-1040mbar (positive pressure: 8KPA-104KPA) (negative pressure: 8KPA-73KPA) (for the convenience of selecting different specifications, single-stage/two-stage models are available)

Airflow: 40m3/h-3000m3/h (for the convenience of selecting different specifications, both single-stage and two-stage models are available)

Frequency: 50HZ/60HZ

Voltage: 110V-200V-220V-280V-380V-400V-415V-440V-600-615V (universal voltage, applicable to all countries). If special voltage is required, it can be customized according to requirements

Pressure relief valve: RV-01 RV-02 (for use with)

Filter: MF08 MF10 MF12 MF16 MF20 MF32

Vortex fan1. Super quiet type, no noise: The motor runs directly, with full wind probability and low energy consumption. The effective design ensures safe operation even when working conditions change. By adding an integrated sound suppression device, the high noise of the high-pressure fan is improved, achieving a silent effect. Structural design of bearings, improvement of processing techniques, control of production process cleanliness, and optimization of related components to reduce bearing vibration noise High reliability: The machine can still operate safely even when the usage situation changes. When the impeller inside the high-pressure fan rotates, the wind vane will promote the negative gas to move forward and outward, forming a series of spiral movements. Apart from the impeller, the high-pressure blower has no other actions, so its high reliability is almost maintenance free. A machine can have two functions: it can blow and suck air, and it uses precision outer bearings with good heat dissipation. Therefore, it has the following advantages: high compression ratio; The operating temperature of the bearing is low; Long service life of lubricating grease; No maintenance required. 3. Easy to install and equip, can be installed and used at any time. The transmission adopts a two-stage high-speed Taiwanese motor, which has stable performance and outstanding effects. It allows you to buy imported fan quality at the price of domestic fans, for compressed air or vacuum pumping, and can also be installed in any horizontal or vertical direction. When the oil-free impeller rotates, it does not come into contact with any parts and is directly connected to the motor shaft without internal lubrication. Therefore, the output air is completely oil-free, pure, and lubrication free, making it possible.

Chicken manure fermentation aeration high-pressure fan biological oxygenation fermentation aeration vortex fan high-pressure vortex air pump

AfterSalesService :

• High pressure vortex air pump