Full Wind MCJC-5500-4-Q Electrostatic Spray Coating Process Surface Treatment 5.5KW Grinding Machine Pulse Dust Collector

Description :

Full Wind MCJC-5500-4-Q Electrostatic Spray Coating Process Surface Treatment 5.5KW Grinding Machine Pulse Dust Collector

Powerful vacuum industrial dust collectorAs an efficient dust removal equipment, it has been widely used in various industrial sectors. In recent years, with the development of the national economy and increasingly strict environmental protection requirements, high-pressure dust collectors have seen significant growth in production and an increasing variety of products. Therefore, in the design work, selecting the basic parameters of the bag filter reasonably and designing the dust removal system correctly not only plays an important role in controlling pollution and protecting the environment, but also has significant economic significance in improving the equipment's ability to handle dusty gases, reducing equipment investment, and thus reducing project costs.

Full Wind MCJC-5500-4-Q Electrostatic Spray Coating Process Surface Treatment 5.5KW Grinding Machine Pulse Dust Collector

Pulse dust collectorComprehensive selection suggestions: 1. As a small hand grinder, flat grinder, tool grinder and other small grinding machines, if it is only fine grinding or dry grinding, it is recommended to use this vacuum cleaner. Firstly, it has low power, simple dust collection method, economy, environmental friendliness, and low noise.

　　2. As a larger precision grinder or inner and outer circular grinder, in addition to dehumidification grinding, consider using a 750W or higher power vacuum cleaner as much as possible, first considering the dust collection capacity and work efficiency, and single machine configuration.

　　3. If there is a combination of grinding fluid and workpiece during the precision grinding process, a 750W wet dry dual-purpose dust collector or a higher-level power vacuum cleaner must be selected. 4. Factors affecting the effectiveness of grinding machine vacuum cleaners: 1 Generally, in practical use, the suction power of industrial vacuum cleaners should be determined based on the weight and density of the waste being sucked in. When suctioning heavier particles, it is necessary to consider the diameter and length of the connecting pipe. The main factors that usually affect the suction effect are: too thick pipe diameter, too long pipe diameter, too low power of the suction fan itself, too many bends connected, and poor grading treatment! 3. Improper selection of the matching vacuum hood and improper design of the vacuum air outlet both affect the effectiveness of the vacuum cleaner. A commonly used equipment in industry, used for collecting waste, filtering and purifying air, and cleaning the environment during industrial production processes. Widely used in the textile and chemical industries, it can prevent the hazards of some occupational diseases.

Industrial dust collectorPrecautions for use:

　　During use, it should be managed by a dedicated person as much as possible. For first-time use, check whether the filter bag and filter element are installed properly, check the direction of the fan, and for those using belt transmission, check whether the belt has fallen off. After each use, try to clean the dust in the filter bag as much as possible to prevent moisture adhesion, which is not conducive to filtration and can easily damage the filter bag. Before use, check whether the filter bag and filter element are damaged. If they are damaged, the industrial vacuum cleaner should be replaced in a timely manner. It is strictly prohibited to use damaged filter bags and filters. If the suction force decreases during use, it is necessary to check whether the vacuum tube and suction head are blocked, whether the filter bag is too full, and whether there is too much dust on the surface of the filter element. Depending on the amount of dust, the bag and filter can be cleaned regularly or periodically. The bag can be regenerated by washing, and the filter can be shaken off by compressed air blowing back or gently tapping with hands.

AfterSalesService :

• Grinding machine pulse dust collector