Vacuum suction blower, fully automatic feeding high-pressure fan, suction vortex air pump

Description :

Vacuum suction blower, fully automatic feeding high-pressure fan, suction vortex air pump

Vortex high-pressure air pumpSpecifications:

Power: 0.18KW 0.4KW 0.75KW 1.1KW 1.3KW 1.5KW 2.2KW 4KW 5.5KW 7.5KW 11KW 15KW 20KW 25KW

High temperature resistant type: 0.4KW 0.75KW 1.5KW 2.2KW 3.7KW 5.5KW 7.5KW 11KW 15KW

Single phase voltage: 0.2KW, 0.4KW, 0.55KW, 0.75KW, 0.85KW, 1.1KW, 1.3KW, 2.2KW

Wind pressure: 50mbar-1010mbar

Airflow: 40m3/h-3000m3/h (for the convenience of selecting different specifications, both single-stage and two-stage models are available)

Frequency: 50HZ/60HZ Voltage: 110V-615V (universal voltage, applicable to all countries). If special voltage is required, it can be customized according to requirements

Pressure relief valve: RV-01 RV-02 (for use with)

Filter: MF08 MF10 MF12 MF16 MF20 MF32

Parameter selection:

The main parameters for selection are power, air volume and pressure (which require certain requirements for calculation), voltage, etc.

Due to the widespread use of vortex air pumps, their selection method is the same as that of high-pressure fans. Generally speaking, the following two steps need to be followed:

1. Need to determine what function of the high-pressure fan is used on site, whether it is suction or blowing, and find the corresponding pressure flow curve of the high-pressure fan; If the curve is misread, sometimes the selected product cannot be used;

2. Based on the calculated pressure and flow rate, find the working curve above the corresponding working point that satisfies both pressure and flow rates on the curve graph; Then select the high-pressure fan model based on the working curve;

As long as it is a different work site, its requirements for pressure and flow rate are different, so in order to obtain relatively accurate data, relevant calculations need to be carried out. This needs to be done by designers or consulted with companies.

Vacuum suction blower, fully automatic feeding high-pressure fan, suction vortex air pump

Characteristics:Stable flow, high efficiency, and low energy consumption: Under previous design and strict quality control, high-pressure blowers have the following performance. Low energy consumption: Therefore, any method such as blowing, spraying, or suction has its effectiveness, and high-pressure blowers have a relatively conservative design in the high-pressure range. When the usage situation changes, the high-pressure blower still operates safely. High reliability: Apart from the impeller, the high-pressure blower has no other moving parts, and the impeller is directly connected to the motor without gears or transmission belts, making it highly reliable and almost maintenance free. Easy to install: The high-pressure blower can be installed at any time in the place of use for compressed air or for vacuuming. And it can be installed in any horizontal or vertical direction. Low vibration: The mechanical precision is high, and the other components of the rotating part have undergone extremely precise balance design, testing, and calibration, so the vibration rate is very low. Low noise: Directly driven by a low-noise motor, with built-in mufflers at both the inlet and outlet to reduce noise during operation. Robust structure: The vortex high-pressure air pump body is cast with AC10 aluminum alloy, which is different from the Taiwan, China vortex air pump made of ordinary iron shell, and is more durable. No oil and gas, no pollution: When the impeller rotates, it does not come into contact with any components and is lubrication free. Space saving - sturdy design reduces space waste.

AfterSalesService :

• Vacuum suction blower