Aerobic vortex air pump for fish and shrimp farming pond, large-scale oxygenation, high-pressure air pump

Description :

　　 Full wind high-pressure fan, domestically produced high-pressure fan, aerating vortex air pump, fish and shrimp breeding pool oxygenation, large-scale aerating high-pressure air pump

　　With the dual drive of national policies and the market, the wind turbine industry's billion dollar market continues to expand. Jiangsu Quanfeng Environmental Protection Technology Co., Ltd., as an early practitioner and witness in China's wind turbine industry, is increasingly building itself into a company with a comprehensive product service system and core technological competitivenessDomestic high-pressure fanIn the field.

　　The previous company has formed a development pattern mainly consisting of insulated medium pressure fans, variable frequency explosion-proof high pressure fans, full air annular high pressure fans, Taiwan through type medium pressure blowers, high pressure fans, annular high pressure fans, vortex high pressure air pumps, explosion-proof high pressure fans, through type medium pressure blowers, and full air fans, supplemented by other air fluid equipment (vacuum pumps and blowers).

　　Especially the second-generation new product with independent intellectual property rights - the circular high-pressure fan, with a 30% increase in pressure compared to the previous generation, upgraded in quality and performance, and launched on the market under the new brand "TWYX". Quickly capture market share and become a true 'dark horse' level product.

　　Performance characteristics: stable flow, high efficiency, low energy consumption: Under previous design and strict quality control, it has the following performance. Low energy consumption: Therefore, any method such as blowing, spraying, or suction has its effectiveness, and it has a relatively conservative design in the high-pressure range, ensuring safe operation even when there are changes in usage. Easy to install: can be installed in any horizontal or vertical direction. High reliability: Apart from the impeller, there are no other moving parts, and the impeller is directly connected to the motor without gears or transmission belts, making it highly reliable and almost maintenance free. Low vibration: The mechanical precision is high, and the other components of the rotating part have undergone extremely precise balance design, testing, and calibration, so the vibration rate is very low. Space saving - sturdy design reduces space waste. High quality: With more than ten years of manufacturing experience and rigorous quality control, all parts can meet the requirements of high quality. To ensure performance, each fan undergoes operational testing before leaving the factory

　　How to maintain the use of high-pressure fans:

　　1. Maintenance carried out when the pressure or flow rate of the air pump decreases

　　When there is a decrease in pressure and flow rate, first cut off the power supply of the vortex air pump, check if there is anything blocking the air inlet, and inspect the air inlet filter screen. However, do not remove the filter screen, otherwise debris will be sucked into the air pump, causing damage. Secondly, if debris is found inside the machine, it may cause the rubber skin to press against the electromagnet, resulting in the electromagnet being unable to recover its position. At this point, you can open the outer shell of the vortex air pump and clean the internal debris. Drill a small hole in the rubber skin to eliminate the adsorption effect caused by negative pressure. The lack of phase or incorrect direction of operation of the motor is also a cause of such faults. At this time, the power supply should be checked and reconnected. If the motor burns out, it should be replaced with a motor of the same model. For single-phase motors, check whether the capacitor is intact and whether the wiring is correct.

　　2. Maintenance carried out when the noise of the air pump increases

　　Firstly, check if there are any debris inside the vortex air pump body. If so, open the casing and clean the internal debris; Next, check if the impeller is stuck. At this point, it is best to contact the manufacturer for repair, as reassembly is necessary to eliminate the fault. Check if the bearings are damaged and replace them if necessary.

　　3. Maintenance performed when the pump temperature rises

　　Firstly, check if the air intake is blocked, clean the air intake filter, but do not remove it, otherwise it will suck in debris and damage the mechanical equipment. Please maintain the working time gap of the air pump appropriately. Next, check for any debris inside the body, open the outer shell, and clean up the internal debris.

　　The selection and maintenance of high-pressure fans are very important, whether they are used well or not. For the same product, if the selection is incorrect, many problems will occur during use, which will affect the service life of the high-pressure fan and even directly damage it.

AfterSalesService :

• Aerobic vortex air pump