Flat radar water level gauge, radar liquid level gauge. Welcome to call

Description :

　　The precision level and function of precision function inspection are selected based on measurement requirements and usage scenarios to achieve cost-effectiveness. For example, in situations such as trade settlement, product handover, and energy measurement, higher accuracy levels such as 1.0, 0.5, or higher should be selected; For process control applications, choose different accuracy levels according to control requirements; In some cases where only the process flow is detected without the need for control and measurement, a slightly lower accuracy level, such as 1.5, 2.5, or even 4.0, can be selected. In this case, a low-cost plug-in radar level gauge can be used.

　　Radar level gauge belongs to the general radar level gauge, which is a measuring instrument based on the time travel principle. The radar wave runs at the speed of light, and the running time can be converted into a level signal through electronic components. The probe emits high-frequency pulses that propagate at the speed of light in space. When the pulses encounter the surface of the material, they are reflected back and received by the receiver inside the instrument, which converts the distance signal into a level signal.

　　The measurement method of radar water level gauge is based on the principle of time-domain reflection (TDR). Some pulses of the radar level gauge are reflected to form echoes and return along the same path. However, considering the effects of corrosion and adhesion, the final value of the measurement range should be at least 100mm away from the antenna. For overflow protection, a safe distance of the radar level gauge can be defined to be added to the blind zone. The small measurement range is related to the antenna. With different concentrations, foam can both absorb microwave and reflect it, but it can be measured under certain conditions. Return to the pulse transmission device.

AfterSalesService :

• Flat radar water level gauge